STM32-NanoCortex

Chicken-Fried·STM32-NanoCortex

STM32-NanoCortex PCB layout, top view — open source STM32 board by Chicken-Fried

About the STM32-NanoCortex PCB

STM32-NanoCortex is an open source STM32 PCB design by Chicken-Fried, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 20 × 38.5 mm, with 28 components from 21 distinct parts.

Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 8 capacitors, 7 resistors, 3 connectors, 2 ICs, 2 switches and 2 LEDs.

It belongs with the dev boards & breakouts, displays & leds and audio designs in this gallery.

From the project

Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.

Minimalist ARM Cortex-M0 development board — 20 mm × 38.5 mm, native USB-C, crystal-less

🇫🇷 Version française · 📄 Schematic (PDF) · 🧰 Getting started · 📌 Pinout

A practical, standalone 32-bit development board (20 mm × 38.5 mm), inspired by the minimalist philosophy and straightforward nature of the Arduino ATtiny, but optimized for comfortable benchtop development (devboard). Powered by the STM32F042 (ARM Cortex-M0) with native crystal-less USB-C, a TVS-protected USB input and a ceramic-only 3.3 V power stage.

STM32-NanoCortex, from the project README
From the project README

Main components on the STM32-NanoCortex

STM32-NanoCortex bill of materials (BOM)

28 components, 21 distinct parts.

QtyPartRefs
1
STM32F042F6P6
U1
1
USBLC6-2SC6
U3
2
Conn_01x09_Pin
J1, J2
1
Conn_02x02_Top_Bottom
J3
1
JK-SMD0603-050-6
F1
1
ME6211C33M5G-N
MICRONE(南京微盟)
LDO1
2
SKRKAEE020
ALPSALPINE(阿尔卑斯阿尔派)
SW1, SW2
1
GT-USB-7025
G-Switch(品赞)
USB1
1
16-213/BHC-AN1P2/3T
EVERLIGHT(亿光)
LED1
1
WS2812B-2020-V6
worldsemi
LED2
1
SD05-01FTG
D1
1
2.2u / 25V / X7R
C1
1
1u / 25V / X7R
C2
3
100n
C3, C7, C8
1
4.7u
C4
1
10n
C5
1
1u
C6
2
5.1k
R1, R2
2
1k
R3, R5
2
10k
R4, R7
Show 1 more
QtyPartRefs
1
330
R6

STM32-NanoCortex design files

The KiCad project lives in the Chicken-Fried/STM32-NanoCortex repository on GitHub; these links point at the commit this page was built from.

STM32-NanoCortex: common questions

What microcontroller does the STM32-NanoCortex use?

The STM32-NanoCortex is built around the STM32F042F6P6, from the STM32 family.

How big is the STM32-NanoCortex PCB?

The STM32-NanoCortex measures 20 × 38.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-NanoCortex?

28 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-NanoCortex design files?

From the Chicken-Fried/STM32-NanoCortex repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32-NanoCortex design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which Chicken-Fried chose for the repository.

Can I test firmware for the STM32-NanoCortex without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards