Chilichip console hardware
chili-chip·chilichip-console-hardware
About the Chilichip console hardware PCB
Chilichip console hardware is an open source RP2040/RP2350 PCB design by chili-chip, published on GitHub under the MIT license. It is a 2-layer board measuring 52 × 51 mm, with 39 components from 19 distinct parts.
Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the NCP1117ST33T3G and W25Q128JVSIQ. By type, the board carries 19 capacitors, 9 resistors, 4 connectors, 3 ICs, 2 switches and 1 crystal.
From the project
Chilichip Console — next-gen hardware (mostly SMD PCB with integrated MCU)
KiCad project for the next ChiliChip console board (SMD, RP2350 on the board). It is at the planning stage.
The board starts from Raspberry Pi's RP2350A minimal design example, unchanged so far. Thanks to Raspberry Pi Ltd for publishing it.
MIT, see LICENSE.txt. The copyright notice is Raspberry Pi Ltd's and stays in place. When we change the design, we add our own copyright line next to it.
Main components on the Chilichip console hardware
Chilichip console hardware bill of materials (BOM)
39 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350A | rpi_rp2350a_vias | U1 |
| 1 | NCP1117ST33T3G | onsemi_ncp1117st33t3g | U2 |
| 1 | W25Q128JVSIQ | generic_soic127p790x195-8 | U3 |
| 1 | 12MHz | generic_xtalcc320x250x80-4 | X1 |
| 1 | 10103594-0001LF | amphenol_10103594-0001lf | J1 |
| 2 | TSW-118-07-L-D | samtec_tsw-118-07-l-d | J2, J3 |
| 1 | SM03B-SRSS-TB(LF)(SN) | jst_sm03b-srss-tb-lf--sn- | J4 |
| 2 | 434133025816 | wurthelek_434133025816 | SW1, SW2 |
| 1 | 3.3u | abracon_aota-b201610s3r3-101-t | L1 |
| 3 | 10u | generic_capc2012x125 | C1, C5, C19 |
| 11 | 100n | generic_capc1005x50 | C2, C8, C10, C11, C12, C13, C14, C15 +3 |
| 2 | 15p | generic_capc1005x50 | C3, C4 |
| 2 | 4.7u | generic_capc1005x50_wide | C6, C7 |
| 1 | 4.7u | generic_capc1005x50 | C9 |
| 1 | 10k | generic_resc1005x35 | R1 |
| 3 | 1k | generic_resc1005x35 | R2, R4, R6 |
| 1 | 33 | generic_resc1005x35 | R3 |
| 2 | 27 | generic_resc1005x35 | R7, R8 |
| 2 | 0 | generic_resc1005x35 | R9, R10 |
Chilichip console hardware design files
The KiCad project lives in the chili-chip/chilichip-console-hardware repository on GitHub; these links point at the commit this page was built from.
Chilichip console hardware: common questions
What microcontroller does the Chilichip console hardware use?
The Chilichip console hardware is built around the RP2350A, from the RP2040/RP2350 family.
How big is the Chilichip console hardware PCB?
The Chilichip console hardware measures 52 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chilichip console hardware?
39 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Chilichip console hardware design files?
From the chili-chip/chilichip-console-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Chilichip console hardware design in my own project?
Yes, under the terms of its MIT license, which chili-chip chose for the repository.
Can I test firmware for the Chilichip console hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k