60 open source boards using the RP2350A

Real designs built with the RP2350A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

60 boardsClear filters|Most starred

How designs wire the RP2350A

Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the RP2350A connects to, and the resistors, capacitors and other passives placed on it.

  • The USB_DM_51 pin has a series resistor on 34 of 35 designs, most often 27 Ω (then 22 Ω).
  • The USB_DP_52 pin has a series resistor on 34 of 35 designs, most often 27 Ω (then 22 Ω).
  • The XOUT_22 pin has a series resistor on 33 of 35 designs, most often 1 kΩ.
  • The QSPI_SS_60 pin has a series resistor on 33 of 35 designs, most often 1 kΩ (then 0 Ω).
IOVDD_1pin 1Connected to: 3.3V 92%
  • Decoupling capacitor on 89% · 100 nF (94), 4.7 µF (25), 10 µF (8)
GPIO0_2pin 2Connected to: A connector 42%
  • Series resistor on 31% · 0 Ω (8), 47 kΩ (1), 22 Ω (1)
DVDD_6pin 6Connected to: 1.1V 89%
  • Decoupling capacitor on 78% · 100 nF (29), 4.7 µF (5), 10 µF (2)
IOVDD_11pin 11Connected to: 3.3V 94%
  • Decoupling capacitor on 86% · 100 nF (86), 10 µF (8), 4.7 µF (2)
IOVDD_20pin 20Connected to: 3.3V 94%
  • Decoupling capacitor on 91% · 100 nF (79), 10 µF (8), 22 µF (1)
XIN_21pin 21Connected to: Signal 100%
  • Capacitor to GND on 89% · 15 pF (22), 22 pF (3), 27 pF (2)
  • Crystal on 89% · 12 MHz (23)
XOUT_22pin 22Connected to: Signal 100%
  • Series resistor on 94% · 1 kΩ (32)
DVDD_23pin 23Connected to: 1.1V 91%
  • Decoupling capacitor on 80% · 100 nF (21), 4.7 µF (20)
IOVDD_30pin 30Connected to: 3.3V 94%
  • Decoupling capacitor on 86% · 100 nF (79), 10 µF (6), 22 µF (1)
IOVDD_38pin 38Connected to: 3.3V 94%
  • Decoupling capacitor on 86% · 100 nF (84), 4.7 µF (24), 10 µF (6)
DVDD_39pin 39Connected to: 1.1V 91%
  • Decoupling capacitor on 86% · 100 nF (33), 4.7 µF (29), 10 µF (2)
ADC_AVDD_44pin 44Connected to: 3.3V 86%
  • Decoupling capacitor on 89% · 100 nF (58), 4.7 µF (22), 10 µF (7)
IOVDD_45pin 45Connected to: 3.3V 94%
  • Decoupling capacitor on 89% · 100 nF (72), 4.7 µF (26), 10 µF (8)
VREG_AVDD_46pin 46Connected to: VREG_AVDD 60% · a signal 40%
  • Decoupling capacitor on 89% · 4.7 µF (28), 10 µF (4), 100 nF (4)
VREG_PGND_47pin 47Connected to: GND 91%
VREG_LX_48pin 48Connected to: VREG_LX 51% · a signal 46%
  • Inductor on 91% · 3.3 µH (29), 4.7 µH (1)
VREG_VIN_49pin 49Connected to: 3.3V 97%
  • Decoupling capacitor on 89% · 100 nF (74), 4.7 µF (27), 10 µF (6)
VREG_FB_50pin 50Connected to: 1.1V 91%
  • Decoupling capacitor on 89% · 4.7 µF (32), 100 nF (23), 10 µF (4)
  • Inductor on 89% · 3.3 µH (29)
USB_DM_51pin 51Connected to: Signal 100%
  • Series resistor on 97% · 27 Ω (31), 22 Ω (1), 27.4 Ω (1)
USB_DP_52pin 52Connected to: Signal 100%
  • Series resistor on 97% · 27 Ω (31), 22 Ω (1), 27.4 Ω (1)
USB_OTP_VDD_53pin 53Connected to: 3.3V 94%
  • Decoupling capacitor on 89% · 100 nF (74), 4.7 µF (26), 10 µF (8)
QSPI_IOVDD_54pin 54Connected to: 3.3V 94%
  • Decoupling capacitor on 91% · 100 nF (85), 4.7 µF (27), 10 µF (8)
QSPI_SS_60pin 60Connected to: Signal 100%
  • Series resistor on 94% · 1 kΩ (29), 0 Ω (8), 6.8 kΩ (1)
  • Pull-up to 3.3V on 31% · 10 kΩ (9), 4.7 kΩ (1), 1 kΩ (1)
GND_61pin 61Connected to: GND 88%

37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EnvOpenPico2350 by Envious-Data, Ink screen badge for Undercity by cheyao, Rp2350-decoder by mikesmitty and Magnetic Encoder Board by ROAR-QUTRC.

The RP2350A in open source designs

The gallery holds 60 open source boards using the RP2350A from 37 GitHub repositories; a typical one measures about 60 × 55 mm and carries around 77 components.

73% use four copper layers or more, and 60% carry an open source license.

The most starred is EnvOpenPico2350 by Envious-Data.

Microcontrollers on boards using the RP2350A

RP2350A: common questions

Where can I find a RP2350A reference design?

Each of the 60 boards on this page is a real design using the RP2350A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the RP2350A USB_DM_51 pin?

The USB_DM_51 pin has a series resistor on 34 of 35 designs, most often 27 Ω (then 22 Ω). Counted from the KiCad layouts of 36 open source designs using the RP2350A.

What resistor goes on the RP2350A USB_DP_52 pin?

The USB_DP_52 pin has a series resistor on 34 of 35 designs, most often 27 Ω (then 22 Ω). Counted from the KiCad layouts of 36 open source designs using the RP2350A.

What resistor goes on the RP2350A XOUT_22 pin?

The XOUT_22 pin has a series resistor on 33 of 35 designs, most often 1 kΩ. Counted from the KiCad layouts of 36 open source designs using the RP2350A.

What parts are used alongside the RP2350A?

The W25Q128JVSIQ, USBLC6-2SC6, W25Q128JVS, W25Q16JVUXIQ and NCP1117ST33T3G appear in the most repositories here.

Which microcontrollers do boards using the RP2350A use?

Most are built on RP2040/RP2350 (60).

How big is a typical board using the RP2350A?

The median is 60 × 55 mm, and 27% are two-layer designs.

What is the most popular open source board using the RP2350A?

By GitHub stars, EnvOpenPico2350 by Envious-Data, with 151 stars.

Can I simulate one of these boards using the RP2350A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part