2mm 2row esp breakout
About the 2mm 2row esp breakout
2mm 2row esp breakout is an open source ESP32 PCB design by chinesejacklee, published on GitHub. It is a 2-layer board measuring 39.5 × 23.3 mm, with 7 components from 4 distinct parts.
Its main chip is the ESP32-WROOM-32E-N8, from the ESP32 family. By type, the board carries 6 connectors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the design into a 3D model ready to be printed. Also included ar
This Github repository contains the Python macro component used during the DissolvPCB fabrication process. The macro enables users to design custom PCB assemblies using standard practices, then automatically convert the design into a 3D model ready to be printed. Also included are some PCB design examples that were used for the demonstration of the DissolvPCB fabrication process. Listed below are the prerequisites and instructions on how to utilize this tool. Detailed instructions on the entire DisssolvPCB fabrication process can be found under DissolvPCB Processs Details.
Main components on the 2mm 2row esp breakout
2mm 2row esp breakout bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E-N8 | ESP32WROOM32E_EXP | U1 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.00mm_Vertical | J1, J2 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.00mm_Vertical | J3, J4 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.00mm_Vertical | J5, J6 |
2mm 2row esp breakout design files
The KiCad project lives in the chinesejacklee/3dprintPCB repository on GitHub; these links point at the commit this page was built from.
2mm 2row esp breakout: common questions
What microcontroller does the 2mm 2row esp breakout use?
The 2mm 2row esp breakout is built around the ESP32-WROOM-32E-N8, from the ESP32 family.
How big is the 2mm 2row esp breakout?
The 2mm 2row esp breakout measures 39.5 × 23.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2mm 2row esp breakout?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2mm 2row esp breakout design files?
From the chinesejacklee/3dprintPCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2mm 2row esp breakout design in my own project?
The repository has no license, so all rights stay with chinesejacklee. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2mm 2row esp breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in 3dprintPCB
ESP32Rev 2 ESP Speaker 2row esp
60.8 × 40.8 mm39 parts2LNo license0
ESP32Rev 3 ESP Speaker 2row esp
75.9 × 41.3 mm39 parts2LNo license0
ESP32Rev 4 ESP Speaker 2row esp.kicad pro
69 × 43.2 mm39 parts2LNo license0
Fidget
140 × 105 mm14 parts2LNo license0
Sample circuit 01
30 × 25 mm13 parts2LNo license0
Sample circuit 02 polygon
42.5 × 28.9 mm13 parts2LNo license0
Sample circuit 01 FR-4
30 × 25 mm13 parts2LNo license0
Recycled driver
23.7 × 26.1 mm8 parts2LNo license0
DoubleLayer trial
29.3 × 17.7 mm6 parts2LNo license0
ESP322 54mm esp breakout
38 × 41 mm3 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k