21 open source boards using the ESP32-WROOM-32E-N8
Real designs built with the ESP32-WROOM-32E-N8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Partial Drawer Controller v1
Robast-GmbH
408.7 × 50 mm556 parts4LMIT1ESP32
Esp32-cc1101-multiband
bdini13
90 × 36 mm105 parts4LCustom license1- schematic only · 47 partsESP32
MY-COOL-ESP32
bhardwajpragya1111-lgtm
47 partsNo license1 ESP32
Homey
jadam3k
99 × 90 mm95 parts2LNo license0ESP32
Esp32-energy meter
kbssrikar7
160 × 110 mm76 parts2LNo license0ESP32
TheBetterWakelight
tomsmilton
66 × 42 mm31 parts2LNo license0ESP32
Eink weather station
EthanGreenhouse
80 × 60 mm29 parts2LNo license0- schematic only · 54 partsESP32
Esp32-light sensor reference
Sid93
54 partsNo license0 ESP32
Partial Drawer Controller v1 hotfix
Robast-GmbH
408.7 × 50 mm556 parts4LMIT1ESP32
A3-before crystal refinement
bdini13
90 × 36 mm105 parts4LCustom license1ESP32
ClearBell Ausseneinheit
akoerner-dev
110 × 60 mm45 parts2LMIT1ESP32
Envinode
aneeshlingala
62.2 × 62.2 mm14 parts2LNo license0ESP32
Drawer Controller v4
Robast-GmbH
118 × 47 mm126 parts4LMIT1ESP32
A3-before local finishing
bdini13
90 × 36 mm105 parts4LCustom license1ESP32
Drawer Controller v4 hotfix
Robast-GmbH
118 × 47 mm126 parts4LMIT1ESP32
A3-critical routes
bdini13
90 × 36 mm105 parts4LCustom license1ESP32
ClearBell Inneneinheit
akoerner-dev
98 × 60 mm28 parts2LMIT1ESP32
A3-routing candidate
bdini13
90 × 36 mm105 parts4LCustom license1ESP32
A2-routing candidate
bdini13
90 × 36 mm91 parts4LCustom license1ESP32
2mm 2row esp breakout
chinesejacklee
39.5 × 23.3 mm7 parts2LNo license0ESP32
2 54mm esp breakout
chinesejacklee
38 × 41 mm3 parts2LNo license0
How designs wire the ESP32-WROOM-32E-N8
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ESP32-WROOM-32E-N8 connects to, and the resistors, capacitors and other passives placed on it.
- The NC_32 pin is left unconnected on 9 of 9 designs.
- The EN_3 pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 1 µF).
- The EN_3 pin has a pull-up to 3.3V on 7 of 9 designs, most often 10 kΩ.
- The 3V3 pin is tied to 3.3V on 7 of 9 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 78% · a signal 22% | — |
| 3V3pin 2 | Connected to: 3.3V 78% · a signal 22% | — |
| EN_3pin 3 | Connected to: A connector 33% |
|
| SENSOR_VP_4pin 4 | Connected to: Not connected 78% · a signal 22% | — |
| SENSOR_VN_5pin 5 | Connected to: Not connected 67% · a signal 33% | — |
| IO12_14pin 14 | Connected to: Not connected 78% · a signal 22% | — |
| GND_15pin 15 | Connected to: GND 78% · a signal 22% | — |
| NCpin 17, 18, 19, 20, 21, 22 | Connected to: Not connected 100% | — |
| IO0_25pin 25 | Connected to: A connector 22% |
|
| NC_32pin 32 | Connected to: Not connected 100% | — |
| IO21_33pin 33 | Connected to: Signal 89% |
|
| GND_38pin 38 | Connected to: GND 78% · a signal 22% | — |
| GND_39pin 39 | Connected to: GND 78% · a signal 22% | — |
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ClearBell Ausseneinheit by akoerner-dev, Esp32-cc1101-multiband by bdini13, Drawer Controller v4 by Robast-GmbH and Envinode by aneeshlingala.
The ESP32-WROOM-32E-N8 in open source designs
The gallery holds 21 open source boards using the ESP32-WROOM-32E-N8 from 11 GitHub repositories; a typical one measures about 90 × 47 mm and carries around 91 components.
53% use four copper layers or more, and 29% carry an open source license.
The most starred is Partial Drawer Controller v1 hotfix by Robast-GmbH.
Parts used alongside the ESP32-WROOM-32E-N8
Microcontrollers on boards using the ESP32-WROOM-32E-N8
What boards using the ESP32-WROOM-32E-N8 are built for
ESP32-WROOM-32E-N8: common questions
Where can I find a ESP32-WROOM-32E-N8 reference design?
Each of the 21 boards on this page is a real design using the ESP32-WROOM-32E-N8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-WROOM-32E-N8 NC_32 pin connected?
The NC_32 pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the ESP32-WROOM-32E-N8.
How is the ESP32-WROOM-32E-N8 EN_3 pin connected?
The EN_3 pin has a capacitor to GND on 7 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the ESP32-WROOM-32E-N8.
How is the ESP32-WROOM-32E-N8 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the ESP32-WROOM-32E-N8.
What parts are used alongside the ESP32-WROOM-32E-N8?
The AMS1117-3.3, AP2112K-3.3TRG1, CH340C, CP2102N-A02-GQFN28R and TP4056-42-ESOP8 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32E-N8 use?
Most are built on ESP32 (21).
How big is a typical board using the ESP32-WROOM-32E-N8?
The median is 90 × 47 mm, and 47% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32E-N8?
By GitHub stars, Partial Drawer Controller v1 hotfix by Robast-GmbH, with 1 stars.
Can I simulate one of these boards using the ESP32-WROOM-32E-N8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.