Adapter board
About the Adapter board
Adapter board is an open source PCB design by ChipCE, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 80.3 × 25.7 mm, with 28 components from 15 distinct parts.
By type, the board carries 12 connectors, 8 capacitors, 4 resistors, 3 diodes and 1 crystal.
It belongs with the robotics & motion designs in this gallery.
From the project
Varios PCB design for 3D printers and drones
Adapter board bill of materials (BOM)
28 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Crystal | Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style1 | Y1 |
| 1 | TAPE | connector-12p-offset | J1 |
| 1 | Conn_01x02_Female | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
| 1 | HEADER3 | PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | HEADER1 | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | BLU | Bluetooth_KCX_BT0003 | J5 |
| 1 | SOP16 | SOP-16_4.55x10.3mm_P1.27mm | J6 |
| 1 | HEADER4 | PinHeader_1x10_P2.54mm_Vertical | J7 |
| 1 | HEADER2 | PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | Conn_01x05_Female | JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J9 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J11, J12 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 8 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | R_US | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
Adapter board design files
The KiCad project lives in the ChipCE/juice-plus-pcb repository on GitHub; these links point at the commit this page was built from.
Adapter board: common questions
How big is the Adapter board?
The Adapter board measures 80.3 × 25.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Adapter board?
28 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adapter board design files?
From the ChipCE/juice-plus-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Adapter board design in my own project?
Yes, under the terms of its GPL-3.0 license, which ChipCE chose for the repository.
More boards in juice-plus-pcb
RP2040/RP2350Pico extender
180.2 × 51.5 mm94 parts4LGPL-3.02
Car bluetooth
99.8 × 48.3 mm53 parts2LGPL-3.02
Bluetooth JDY-67 dev board
44.5 × 43.2 mm30 parts2LGPL-3.02
AVR/ArduinoPwm esc panelized
75.3 × 80.6 mm29 parts2LGPL-3.02
AVR/ArduinoPwm esc
75.2 × 40.1 mm29 parts2LGPL-3.02
Car bluetooth lite
99.8 × 25.4 mm23 parts2LGPL-3.02
Boost converter
76.2 × 59.7 mm19 parts2LGPL-3.02
Duplicate
83.3 × 73.4 mm15 parts2LGPL-3.02
JST-mounter panelized
83 × 75.9 mm6 parts2LGPL-3.02
Noname
30 × 27.9 mm3 parts2LGPL-3.02
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
11ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979