Bluetooth JDY-67 dev board
About the Bluetooth JDY-67 dev board
Bluetooth JDY-67 dev board is an open source PCB design by ChipCE, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 44.5 × 43.2 mm, with 30 components from 14 distinct parts.
Other key parts include the Bluetooth_JDY-67. By type, the board carries 10 resistors, 7 connectors, 6 switches, 3 capacitors, 2 diodes and 1 IC.
It belongs with the robotics & motion, iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Varios PCB design for 3D printers and drones
Main components on the Bluetooth JDY-67 dev board
Bluetooth JDY-67 dev board bill of materials (BOM)
30 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Bluetooth_JDY-67 | Bluetooth_JDY-67 | U1 |
| 1 | PWR | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | UART_PWR | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | UART | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | OUTPUT | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | COMMON_GND | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | SD_VCC_SEL | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | SD | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | Microphone | CP_Radial_D10.0mm_P2.50mm | MK1 |
| 6 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | CP | CP_Radial_D5.0mm_P2.00mm | C1 |
| 2 | C | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C2, C3 |
| 10 | R_US | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
Bluetooth JDY-67 dev board design files
The KiCad project lives in the ChipCE/juice-plus-pcb repository on GitHub; these links point at the commit this page was built from.
Bluetooth JDY-67 dev board: common questions
How big is the Bluetooth JDY-67 dev board?
The Bluetooth JDY-67 dev board measures 44.5 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bluetooth JDY-67 dev board?
30 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bluetooth JDY-67 dev board design files?
From the ChipCE/juice-plus-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Bluetooth JDY-67 dev board design in my own project?
Yes, under the terms of its GPL-3.0 license, which ChipCE chose for the repository.
More boards in juice-plus-pcb
RP2040/RP2350Pico extender
180.2 × 51.5 mm94 parts4LGPL-3.02
Car bluetooth
99.8 × 48.3 mm53 parts2LGPL-3.02
AVR/ArduinoPwm esc panelized
75.3 × 80.6 mm29 parts2LGPL-3.02
AVR/ArduinoPwm esc
75.2 × 40.1 mm29 parts2LGPL-3.02
Adapter board
80.3 × 25.7 mm28 parts4LGPL-3.02
Car bluetooth lite
99.8 × 25.4 mm23 parts2LGPL-3.02
Boost converter
76.2 × 59.7 mm19 parts2LGPL-3.02
Duplicate
83.3 × 73.4 mm15 parts2LGPL-3.02
JST-mounter panelized
83 × 75.9 mm6 parts2LGPL-3.02
Noname
30 × 27.9 mm3 parts2LGPL-3.02
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k