Boost converter
About the Boost converter PCB
Boost converter is an open source PCB design by ChipCE, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 76.2 × 59.7 mm, with 19 components from 12 distinct parts.
Other key parts include the Boost-converter-9-48V. By type, the board carries 10 capacitors, 2 connectors, 2 fuses, 2 diodes, 2 resistors and 1 IC.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Varios PCB design for 3D printers and drones
Main components on the Boost converter
Boost converter bill of materials (BOM)
19 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Boost-converter-9-48V | boost-converter-9-48V | U1 |
| 1 | V_IN | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | HV_OUT | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | VIN_Fuse | Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | HV_Fuse | Fuseholder_Blade_Mini_Keystone_3568 | F2 |
| 1 | PWR_24 | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | PWR_HV | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 2 | 470u | CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 5 | 100n | C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3, C4, C8, C9, C10 |
| 3 | 330u | CP_Radial_D10.0mm_P5.00mm | C5, C6, C7 |
| 1 | 6K8 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
Boost converter design files
The KiCad project lives in the ChipCE/juice-plus-pcb repository on GitHub; these links point at the commit this page was built from.
Boost converter: common questions
How big is the Boost converter PCB?
The Boost converter measures 76.2 × 59.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boost converter?
19 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Boost converter design files?
From the ChipCE/juice-plus-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Boost converter design in my own project?
Yes, under the terms of its GPL-3.0 license, which ChipCE chose for the repository.
More boards in juice-plus-pcb
RP2040/RP2350Pico extender
180.2 × 51.5 mm94 parts4LGPL-3.02
Car bluetooth
99.8 × 48.3 mm53 parts2LGPL-3.02
Bluetooth JDY-67 dev board
44.5 × 43.2 mm30 parts2LGPL-3.02
AVR/ArduinoPwm esc panelized
75.3 × 80.6 mm29 parts2LGPL-3.02
AVR/ArduinoPwm esc
75.2 × 40.1 mm29 parts2LGPL-3.02
Adapter board
80.3 × 25.7 mm28 parts4LGPL-3.02
Car bluetooth lite
99.8 × 25.4 mm23 parts2LGPL-3.02
Duplicate
83.3 × 73.4 mm15 parts2LGPL-3.02
JST-mounter panelized
83 × 75.9 mm6 parts2LGPL-3.02
Noname
30 × 27.9 mm3 parts2LGPL-3.02
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k