Esp32-c6-xiao base
chof747·esp32-c6-xiao-base
About the Esp32-c6-xiao base PCB
Esp32-c6-xiao base is an open source ESP32 PCB design by chof747, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 35 × 22 mm, with 8 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C6-SMD, from the ESP32 family. By type, the board carries 4 resistors, 3 connectors and 1 IC.
From the project
Use this project to create an esp32-c6 module with battery power using the battery connectors on the xiao chip.
Use this project to create an esp32-c6 module with battery power using the battery connectors on the xiao chip.
- ESP32 C6 Xiao module - 2.54 space battery pin connector - Voltage sensing
Main components on the Esp32-c6-xiao base
Esp32-c6-xiao base bill of materials (BOM)
8 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | I2C quiic 1 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | I2C quiic 2 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
Esp32-c6-xiao base design files
The KiCad project lives in the chof747/esp32-c6-xiao-base repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32-c6-xiao-base.kicad_pcb
- Schematicesp32-c6-xiao-base.kicad_sch
Esp32-c6-xiao base: common questions
What microcontroller does the Esp32-c6-xiao base use?
The Esp32-c6-xiao base is built around the XIAO-ESP32-C6-SMD, from the ESP32 family.
How big is the Esp32-c6-xiao base PCB?
The Esp32-c6-xiao base measures 35 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-c6-xiao base?
8 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-c6-xiao base design files?
From the chof747/esp32-c6-xiao-base repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-c6-xiao base design in my own project?
Yes, under the terms of its CC0-1.0 license, which chof747 chose for the repository.
Can I test firmware for the Esp32-c6-xiao base without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k