30 open source boards using the XIAO-ESP32-C6-SMD

Real designs built with the XIAO-ESP32-C6-SMD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the XIAO-ESP32-C6-SMD

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the XIAO-ESP32-C6-SMD connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_OUT_12 pin is tied to 3.3V on 12 of 13 designs.
  • The EN_17 pin is left unconnected on 10 of 10 designs.
  • The MTMS_19 pin is left unconnected on 10 of 10 designs.
  • The BOOT_21 pin is left unconnected on 10 of 10 designs.
D4_5pin 5Connected to: A connector 31% · not connected 15%
  • Pull-up to 3.3V on 46% · 4.7 kΩ (4), 10 kΩ (1)
D5_6pin 6Connected to: A connector 23%
  • Pull-up to 3.3V on 46% · 4.7 kΩ (4), 10 kΩ (1)
3V3_OUT_12pin 12Connected to: 3.3V 92%
GND_13pin 13Connected to: GND 100%
VBUS_14pin 14Connected to: 5V 62% · not connected 31%
  • Decoupling capacitor on 31% · 100 nF (2), 470 µF (1), 10 µF (1)
MTDI_15pin 15Connected to: Not connected 80% · a signal 20%
MTDO_16pin 16Connected to: Not connected 80% · a signal 20%
EN_17pin 17Connected to: Not connected 100%
GND_18pin 18Connected to: GND 60% · not connected 40%
MTMS_19pin 19Connected to: Not connected 100%
MTCK_20pin 20Connected to: Not connected 90%
BOOT_21pin 21Connected to: Not connected 100%
GND_24pin 24Connected to: GND 60% · not connected 20% · a signal 20%

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mlehaptics by lemonforest, Wulpus pro max by Sergio5714, TRX4M-Lightkit by elchue and Mazokchist by anasluqman089.

The XIAO-ESP32-C6-SMD in open source designs

The gallery holds 30 open source boards using the XIAO-ESP32-C6-SMD from 29 GitHub repositories; a typical one measures about 203.1 × 125.1 mm and carries around 21 components.

97% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.

The most starred is XIAO by Josephrp.

Microcontrollers on boards using the XIAO-ESP32-C6-SMD

XIAO-ESP32-C6-SMD: common questions

Where can I find a XIAO-ESP32-C6-SMD reference design?

Each of the 30 boards on this page is a real design using the XIAO-ESP32-C6-SMD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the XIAO-ESP32-C6-SMD 3V3_OUT_12 pin connected?

The 3V3_OUT_12 pin is tied to 3.3V on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the XIAO-ESP32-C6-SMD.

How is the XIAO-ESP32-C6-SMD EN_17 pin connected?

The EN_17 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 13 open source designs using the XIAO-ESP32-C6-SMD.

How is the XIAO-ESP32-C6-SMD MTMS_19 pin connected?

The MTMS_19 pin is left unconnected on 10 of 10 designs. Counted from the KiCad layouts of 13 open source designs using the XIAO-ESP32-C6-SMD.

What parts are used alongside the XIAO-ESP32-C6-SMD?

The XIAO-ESP32-C3-DIP, XIAO-ESP32-C3-SMD, XIAO-ESP32-C5-SMD, XIAO-ESP32-C6-DIP and XIAO-ESP32-S3-DIP appear in the most repositories here.

Which microcontrollers do boards using the XIAO-ESP32-C6-SMD use?

Most are built on ESP32 (15), RP2040/RP2350 (14) and Nordic nRF (1).

How big is a typical board using the XIAO-ESP32-C6-SMD?

The median is 203.1 × 125.1 mm, and 97% are two-layer designs.

What is the most popular open source board using the XIAO-ESP32-C6-SMD?

By GitHub stars, XIAO by Josephrp, with 12 stars.

Can I simulate one of these boards using the XIAO-ESP32-C6-SMD before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part