HardLabs

Kanagawa rgb ansi pico

Ciaanh·keyboards·Kanagawa/rev2/Kanagawa_rgb_ansi_pico.kicad_pcb

Kanagawa rgb ansi pico PCB layout, top view — open source RP2040/RP2350 board by Ciaanh

About the Kanagawa rgb ansi pico PCB

Kanagawa rgb ansi pico is an open source RP2040/RP2350 PCB design by Ciaanh, published on GitHub. It is a 2-layer board measuring 335.2 × 145.9 mm, with 176 components from 15 distinct parts.

Its main chip is the PICO, from the RP2040/RP2350 family. By type, the board carries 2 connectors, 2 resistors and 1 IC.

It belongs with the keyboards designs in this gallery.

Main components on the Kanagawa rgb ansi pico

PICO

Kanagawa rgb ansi pico bill of materials (BOM)

176 components, 15 distinct parts.

QtyPartRefs
1
PICO
Pico
U0
1
Oled128x32
J1
1
Conn_01x03
J4
84
D
DA0, DA1, DA2, DA3, DA4, DA5, DA6, DA7 +76
1
USB Port
JUSB1
72
KEY_SW
KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7 +64
1
KEY_SW
KB13
2
KEY_SW
KC0, KC13
2
KEY_SW
KD0, KE11
2
KEY_SW
KD12, KE0
2
KEY_SW
KF0, KF2
2
KEY_SW
KF4, KF5
2
SW_RST
RSW0, RSW1
1
Rotary_Encoder_Switch
SWA13
2
5.1k
R1, R2

Kanagawa rgb ansi pico design files

The KiCad project lives in the Ciaanh/keyboards repository on GitHub; these links point at the commit this page was built from.

Kanagawa rgb ansi pico: common questions

What microcontroller does the Kanagawa rgb ansi pico use?

The Kanagawa rgb ansi pico is built around the PICO, from the RP2040/RP2350 family.

How big is the Kanagawa rgb ansi pico PCB?

The Kanagawa rgb ansi pico measures 335.2 × 145.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kanagawa rgb ansi pico?

176 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kanagawa rgb ansi pico design files?

From the Ciaanh/keyboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kanagawa rgb ansi pico design in my own project?

The repository has no license, so all rights stay with Ciaanh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kanagawa rgb ansi pico without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in keyboards

Similar boards