HardLabs

Kanagawa rgb pico

Ciaanh·keyboards·Kanagawa/rev2.1/Kanagawa_rgb_pico.kicad_pcb

Kanagawa rgb pico PCB layout, top view — open source RP2040/RP2350 board by Ciaanh

About the Kanagawa rgb pico PCB

Kanagawa rgb pico is an open source RP2040/RP2350 PCB design by Ciaanh, published on GitHub. It is a 2-layer board measuring 339.2 × 147.4 mm, with 185 components from 21 distinct parts.

Its main chip is the PICO, from the RP2040/RP2350 family. By type, the board carries 3 connectors, 2 resistors and 1 IC.

It belongs with the keyboards designs in this gallery.

Main components on the Kanagawa rgb pico

PICO

Kanagawa rgb pico bill of materials (BOM)

185 components, 21 distinct parts.

QtyPartRefs
1
PICO
Pico
U0
1
Oled128x32
J1
1
ANSI RGB Jumper
J2
1
Conn_01x03
J4
84
D
DA0, DA1, DA2, DA3, DA4, DA5, DA6, DA7 +76
4
LED_sk2812_SM
DCa13, DCb13, DDb12, DEb0
1
USB Port
JUSB1
1
USB Breakout
JUSB2
75
KEY_SW
KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7 +67
1
KEY_SW
KB13
1
KEY_SW
KC0
1
KEY_SW
KC13
1
KEY_SW
KCb13
2
KEY_SW
KD0, KE12
2
KEY_SW
KDb12, KEb0
1
KEY_SW
KE0
1
KEY_SW
KF4
1
KEY_SW
KF5
2
SW_RST
RSW0, RSW1
1
Rotary_Encoder_Switch
SWA13
Show 1 more
QtyPartRefs
2
5.1k
R1, R2

Kanagawa rgb pico design files

The KiCad project lives in the Ciaanh/keyboards repository on GitHub; these links point at the commit this page was built from.

Kanagawa rgb pico: common questions

What microcontroller does the Kanagawa rgb pico use?

The Kanagawa rgb pico is built around the PICO, from the RP2040/RP2350 family.

How big is the Kanagawa rgb pico PCB?

The Kanagawa rgb pico measures 339.2 × 147.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kanagawa rgb pico?

185 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kanagawa rgb pico design files?

From the Ciaanh/keyboards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kanagawa rgb pico design in my own project?

The repository has no license, so all rights stay with Ciaanh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kanagawa rgb pico without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in keyboards

Similar boards