AUB
cloudglides·AUB·pcb/AUB.kicad_pcb
About the AUB PCB
AUB is an open source RISC-V PCB design by cloudglides, published on GitHub. It is a 4-layer board measuring 95 × 65 mm, with 68 components from 33 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the CH334U, USBLC6-2SC6, AP2161WG-7 and AP2112K-3.3TRG1. By type, the board carries 26 capacitors, 17 resistors, 9 ICs, 6 connectors, 6 diodes and 3 switches.
It belongs with the usb & debug tools designs in this gallery.
From the project
AUB! stands for another usb hub
AUB is a 4-port USB 2.0 hub built around the WCH CH334U, with a USB-C upstream connection and 4 USB-A downstream ports.
wanted to build my own USB hub instead of buying another generic one. AUB is designed from scratch in KiCad, with proper power switching, ESD protection and a little CH32V003 MCU for the additional controls and status indicators.
the board also has 3 physical buttons and 5 status LEDs. everything is on one PCB, including the hub controller, power circuitry and the supporting MCU.

Main components on the AUB
AUB bill of materials (BOM)
68 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH334U | QSOP-28_3.9x9.9mm_P0.635mm | U1 |
| 5 | USBLC6-2SC6 | SOT-23-6 | U2, U4, U5, U6, U7 |
| 1 | AP2161WG-7 | SOT-23-5 | U3 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U8 |
| 1 | CH32V003F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U9 |
| 1 | X322512MSB4SI 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 USB-C UFP | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 902-131A1011D10100 USB-A Port 1 | USB_A_Receptacle_902-131A1011D10100 | J2 |
| 1 | 902-131A1011D10100 USB-A Port 2 | USB_A_Receptacle_902-131A1011D10100 | J3 |
| 1 | 902-131A1011D10100 USB-A Port 3 | USB_A_Receptacle_902-131A1011D10100 | J4 |
| 1 | 902-131A1011D10100 USB-A Port 4 | USB_A_Receptacle_902-131A1011D10100 | J5 |
| 1 | C5156614 SWIO/UART | PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | TS-1187A-B-A-B CYCLE | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | TS-1187A-B-A-B MODE | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | TS-1187A-B-A-B BRIGHT | SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 5 | C7496818 Green | LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 1 | BAT54WS | D_SOD-323 | D6 |
| 1 | 4.7NF 4.7nF | C_0603_1608Metric | C1 |
| 5 | 10UF 10uF | C_0805_2012Metric | C2, C13, C14, C15, C16 |
| 11 | 100NF 100nF | C_0603_1608Metric | C3, C6, C9, C10, C19, C20, C22, C23 +3 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1UF 1uF | C_0603_1608Metric | C4, C7, C17, C21 |
| 1 | FZ220UF10V90RV0151 220uF 10V | CP_Elec_6.3x7.7 | C5 |
| 1 | 22UF 22uF | C_0805_2012Metric | C8 |
| 2 | DNP | C_0603_1608Metric | C11, C12 |
| 1 | 10UF 10uF | C_0603_1608Metric | C18 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 1M | R_0603_1608Metric | R3 |
| 5 | 100K 100k | R_0603_1608Metric | R4, R11, R12, R13, R14 |
| 1 | 47K 47k | R_0603_1608Metric | R5 |
| 2 | 220 | R_0603_1608Metric | R6, R7 |
| 1 | 470 | R_0603_1608Metric | R8 |
| 2 | 1k | R_0603_1608Metric | R9, R10 |
| 3 | 10K 10k | R_0603_1608Metric | R15, R16, R17 |
AUB design files
The KiCad project lives in the cloudglides/AUB repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/AUB.kicad_pcb
- Schematicpcb/AUB.kicad_sch
- BOMBOM.csv
AUB: common questions
What microcontroller does the AUB use?
The AUB is built around the CH32V003F4P6, from the RISC-V family.
How big is the AUB PCB?
The AUB measures 95 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the AUB?
68 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AUB design files?
From the cloudglides/AUB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AUB design in my own project?
The repository has no license, so all rights stay with cloudglides. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AUB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105