6 open source boards using the CH334U

Real designs built with the CH334U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The CH334U in open source designs

The gallery holds 6 open source boards using the CH334U from 4 GitHub repositories; a typical one measures about 97.5 × 57 mm and carries around 60 components.

50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Misteryshield20k rpipico dual db9 by MiSTle-Dev.

Microcontrollers on boards using the CH334U

What boards using the CH334U are built for

CH334U: common questions

Where can I find a CH334U reference design?

Each of the 6 boards on this page is a real design using the CH334U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the CH334U?

The USBLC6-2SC6, CH552T, FSUSB42MUX, TPS2552DBVR and XC6206P332MR-G appear in the most repositories here.

Which microcontrollers do boards using the CH334U use?

Most are built on WCH CH32/CH55x (2) and RISC-V (1).

How big is a typical board using the CH334U?

The median is 97.5 × 57 mm, and 50% are two-layer designs.

What is the most popular open source board using the CH334U?

By GitHub stars, Misteryshield20k rpipico dual db9 by MiSTle-Dev, with 22 stars.

Can I simulate one of these boards using the CH334U before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part