FC

cloudglides·FC·pcb/FC.kicad_pcb

FC PCB layout, top view — open source STM32 board by cloudglides

About the FC PCB

FC is an open source STM32 PCB design by cloudglides, published on GitHub. It is a 4-layer board measuring 39 × 39 mm, with 63 components from 32 distinct parts.

Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the AP63205WU-7, AP2112K-3.3TRG1, BMI270, BMP388 and W25Q128JVSIQ. By type, the board carries 28 capacitors, 15 resistors, 7 ICs, 5 connectors, 3 diodes and 2 inductors.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

FC is a 39 × 39 mm flight controller for multirotors, built around the STM32F405RGT6, with a 30.5 × 30.5 mm M3 mounting pattern.

FC is a 39 × 39 mm flight controller for multirotors, built around the STM32F405RGT6, with a 30.5 × 30.5 mm M3 mounting pattern.

it has a BMI270 gyro, a BMP388 barometer, 16 MB of blackbox flash and a 2S–6S power stage on one 4-layer board. connectors are JST-SH for a 4-in-1 ESC, receiver, HD VTX and GPS, plus USB-C.

to build your own, grab the KiCad files in pcb/, check the schematic and BOM, and send the Gerber files in production/ to your preferred PCB manufacturer. the MCU can be flashed over USB (hold BOOT while plugging in) or through the SWD pads.

FC, from the project README
From the project README

Main components on the FC

FC bill of materials (BOM)

63 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP63205WU-7
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
U2
1
STM32F405RGT6
U3
1
BMI270
U4
1
BMP388
U5
1
W25Q128JVSIQ
U6
1
USBLC6-2SC6
U7
1
2N7002
Q1
1
XL2EL89CMI-111YLC-8M
8MHz
Y1
1
SM08B-SRSS-TB(LF)(SN)
SM08B-SRSS-TB
J1
1
TYPE-C-31-M-12
J2
1
SM04B-SRSS-TB(LF)(SN)
SM04B-SRSS-TB
J3
2
SM06B-SRSS-TB(LF)(SN)
SM06B-SRSS-TB
J4, J5
1
TS-1187A-B-A-B
BOOT
SW1
1
SS14L
D1
1
KT-0603W
PWR
D2
1
XL-1608UBC-06A
STATUS
D3
1
BLM18PG121SN1D
120R
FB1
1
FHD4020S-6R8MT
6.8uH
L1
2
GRM31CR61H106KA12L
10uF
C1, C2
Show 12 more
QtyPartRefs
1
CC0603KRX7R9BB104
100nF
C3
15
CL05B104KO5NNNC
100nF
C4, C9, C10, C12, C13, C14, C15, C16 +7
2
CL21A226MAQNNNE
22uF
C5, C6
3
CL05A105KA5NQNC
1uF
C7, C8, C17
1
CL10A106KP8NNNC
10uF
C11
2
CL05A225MQ5NSNC
2.2uF
C19, C20
2
0402CG120J500NT
12pF
C21, C22
1
0402WGF1003TCE
100k
R1
6
RC0402FR-0710KL
10k
R2, R8, R9, R10, R14, R15
3
0402WGF1001TCE
1k
R3, R4, R13
3
0402WGF5101TCE
5.1k
R5, R6, R7
2
0402WGF2201TCE
2.2k
R11, R12

FC design files

The KiCad project lives in the cloudglides/FC repository on GitHub; these links point at the commit this page was built from.

FC: common questions

What microcontroller does the FC use?

The FC is built around the STM32F405RGT6, from the STM32 family.

How big is the FC PCB?

The FC measures 39 × 39 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the FC?

63 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FC design files?

From the cloudglides/FC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FC design in my own project?

The repository has no license, so all rights stay with cloudglides. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards