64 open source boards using the BMP388
Real designs built with the BMP388, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
STM32F7 FC
rishikesh2715
38.5 × 38.5 mm127 parts8LMIT56Nordic nRF
AWatch2-hw
jwise
73.4 × 72.7 mm157 parts4LNo license18RP2040/RP2350
Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11Microchip SAM
Allfc
peregrine-developments
50.8 × 81.3 mm136 parts4LMIT6STM32
F8-fc h7 rev a
victorhook
35.5 × 35.5 mm105 parts4LNo license6STM32
Cobalt f405
msaribekyan
38.5 × 38.5 mm68 parts2LGPL-3.06ESP32
Obd32
mkrasselt1
53.9 × 53.1 mm76 parts2LNo license4RP2040/RP2350
PowerBoard
AUV-IITK
77.5 × 108 mm60 parts2LNo license4RP2040/RP2350
BuhSat v0
Sadteeto
100 × 100 mm32 parts2LMIT4ESP32
CopterCat cm4
matveylapin
40 × 55 mm156 parts4LApache-2.03STM32
Ollyfc
rland93
45 × 98 mm101 parts4LMPL-2.02STM32
SLI-HW
dgramop
90 × 125 mm94 parts2LMIT2STM32
PayloadPrototypeBoard2021
Case-Rocket-Team
51.8 × 41.7 mm71 parts2LNo license2ESP32
CAN-HBC-S3
ViktorNfa
70 × 50 mm160 parts4LNo license1ESP32
Environment-Monitor
Dynix7
59.5 × 40 mm49 parts2LMIT1STM32
Icarus
nnarain
37.1 × 43.3 mm43 parts4LNo license1STM32
Stm32n6-px4
DataFlux-Robot
55 × 28 mm21 parts6LApache-2.01STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00RP2040/RP2350
Pyramid of brightness
WilmervH
99 × 99 mm290 parts2LAGPL-3.00STM32
Pcb mantis
si-nalsal
125.2 × 90 mm277 parts6LCERN-OHL-S-2.00STM32
ZenFly F71
LongDo1902
41.5 × 41.5 mm171 parts4LNo license0RP2040/RP2350
ARC PFC
RTU-HPR
50 × 88.5 mm138 parts4LNo license0STM32
Vayu-F722
ishantmahatopro
42 × 42 mm137 parts4LMIT0STM32
MagnumFC
poojithas956
43.6 × 43 mm129 parts6LMIT0RISC-V
Himudev hw
resset
93.6 × 43.6 mm127 parts4LNo license0STM32
Jfox fmu
Jettanakorn
100 × 80 mm125 parts6LNo license0STM32
VERTEX
MiksBalodis
86.8 × 48.3 mm124 parts4LNo license0Microchip SAM
SapphineMinimalR6
ChrisHayward-dev
55.9 × 61 mm121 parts4LNo license0STM32
Flight-Controller-V2
desanv01
40.6 × 50.5 mm115 parts6LCERN-OHL-S-2.00RP2040/RP2350
MedSafe
VarunAPatil
41 × 41 mm113 parts4LNo license0RP2040/RP2350
Smart watch
Paarth-Shirsat
40 × 40 mm109 parts4LNo license0STM32
CF2X
ObitoLambo
36 × 36 mm106 parts4LNo license0STM32
Stm32-flight controller
bassammorsy
108 × 74 mm100 parts4LMIT0ESP32
Esp32 drone 4layerVersion
kstken0210
64 × 64 mm97 parts4LNo license0NXP
Ember
daniel360kim
64 × 64 mm91 parts4LNo license0STM32
Custom flight controller
Prateek-elec
36 × 36 mm82 parts4LMIT0
How designs wire the BMP388
Read from the KiCad layouts of 51 open source designs, one per repository: what each pin of the BMP388 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 44 of 51 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 44 of 50 designs, most often 100 nF (then 10 µF).
- The SDI pin has a pull-up to 3.3V on 30 of 51 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SCK pin has a pull-up to 3.3V on 29 of 51 designs, most often 4.7 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDIOpin 1 | Connected to: 3.3V 84% · a signal 16% |
|
| SCKpin 2 | Connected to: The microcontroller 73%, a connector 25% |
|
| VSSpin 3, 8, 9 | Connected to: GND 96% | — |
| SDIpin 4 | Connected to: The microcontroller 75%, a connector 25% |
|
| VDDpin 10 | Connected to: 3.3V 82% · a signal 18% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32F7 FC by rishikesh2715, VENDETTAFC by Caped-Crussader, AWatch2-hw by jwise and Expansion board v4 by naizhao.
The BMP388 in open source designs
The gallery holds 64 open source boards using the BMP388 from 54 GitHub repositories; a typical one measures about 43.6 × 43 mm and carries around 99 components.
72% use four copper layers or more, and 45% carry an open source license.
The most starred is STM32F7 FC by rishikesh2715.
Parts used alongside the BMP388
Microcontrollers on boards using the BMP388
What boards using the BMP388 are built for
BMP388: common questions
Where can I find a BMP388 reference design?
Each of the 64 boards on this page is a real design using the BMP388. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BMP388 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 44 of 51 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 51 open source designs using the BMP388.
What decoupling capacitors do designs use on the BMP388 VDD pin?
The VDD pin has a decoupling capacitor on 44 of 50 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 51 open source designs using the BMP388.
What pull-up resistor is used on the BMP388 SDI pin?
The SDI pin has a pull-up to 3.3V on 30 of 51 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 51 open source designs using the BMP388.
What parts are used alongside the BMP388?
The ICM-42688-P, USBLC6-2SC6, BMI088, AT7456E and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the BMP388 use?
Most are built on STM32 (30), ESP32 (12), RP2040/RP2350 (7) and RISC-V (2).
How big is a typical board using the BMP388?
The median is 43.6 × 43 mm, and 28% are two-layer designs.
What is the most popular open source board using the BMP388?
By GitHub stars, STM32F7 FC by rishikesh2715, with 56 stars.
Can I simulate one of these boards using the BMP388 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.