Suzibot
About the Suzibot PCB
Suzibot is an open source PCB design by coddingtonbear, published on GitHub. It is a board measuring 74.5 × 51.6 mm, with 27 components from 22 distinct parts.
Other key parts include the LM1117, 74LV4052 and TXB0104. By type, the board carries 8 capacitors, 6 resistors, 4 ICs, 3 diodes, 2 jumpers and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
The computer in the machine.
Main components on the Suzibot
Suzibot bill of materials (BOM)
27 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117 | SPARKFUN-POWERIC_SOT223 | U1 |
| 1 | 74LV4052 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U2 |
| 1 | TXB0104 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U3 |
| 1 | ~ | CH340G_SOIC16 | U$1 |
| 1 | 12M | Crystal_HC49-U_Vertical | Y1 |
| 1 | USB_OTG | USB_Mini-B | J10 |
| 1 | JNHUAMAO_HM-10 | JNHUAMAO_26.9X13X2.2_BOARD | E1 |
| 2 | ~ | Pin_Header_Straight_1x03 | JP1, JP2 |
| 1 | RESET | NANO-SWITCH | SW1 |
| 1 | ORANGE | LED_0805 | D1 |
| 1 | RED | LED_0805 | D2 |
| 1 | BLUE | LED_0805 | D3 |
| 2 | 22p | C_0805_HandSoldering | C1, C2 |
| 1 | 0.01u | C_0805_HandSoldering | C3 |
| 1 | 22u | C_Radial_D5_L6_P2.5 | C4 |
| 4 | 0.1u | C_0805_HandSoldering | C5, C6, C7, C8 |
| 1 | 68 | R_0805_HandSoldering | R1 |
| 1 | 150 | R_0805_HandSoldering | R2 |
| 1 | 100 | R_0805_HandSoldering | R3 |
| 1 | DTR-RST | C_0805 | R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RTS-RST | C_0805 | R5 |
| 1 | 3V3USB | C_0805 | R6 |
Suzibot design files
The KiCad project lives in the coddingtonbear/suzibot repository on GitHub; these links point at the commit this page was built from.
Suzibot: common questions
How big is the Suzibot PCB?
The Suzibot measures 74.5 × 51.6 mm and is 1.6 mm thick.
How many components are on the Suzibot?
27 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Suzibot design files?
From the coddingtonbear/suzibot repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Suzibot design in my own project?
The repository has no license, so all rights stay with coddingtonbear. Use it as a reference, and ask the author before reusing the design.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979