6 open source boards using the TXB0104
Real designs built with the TXB0104, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Gm study e1
fm4dd
100 × 70 mm105 parts2LCERN-OHL-P-2.02AVR/Arduino
NLog 9DoF
kentN
45 × 45 mm51 parts2LMIT1Pmod charlcd
fm4dd
67 × 50 mm26 parts2LCERN-OHL-1.21STM32
Tmb board
janfietz
99.1 × 95.3 mm160 parts2LCC-BY-SA-4.00Suzibot
coddingtonbear
74.5 × 51.6 mm27 partsNo license0ESP32
Integrated circuits
LilyTronics
70 × 79 mm35 parts2LGPL-3.02
How designs wire the TXB0104
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TXB0104 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The VCCA pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
- The EN pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 80% · a signal 20% |
|
| NCpin 6, 9 | Connected to: Not connected 100% | — |
| GNDpin 7, 15 | Connected to: GND 100% | — |
| ENpin 8 | Connected to: 3.3V 60% · a signal 40% | — |
| VCCBpin 14 | Connected to: 5V 100% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gm study e1 by fm4dd, Pmod charlcd by fm4dd, NLog 9DoF by kentN and Suzibot by coddingtonbear.
The TXB0104 in open source designs
The gallery holds 6 open source boards using the TXB0104 from 6 GitHub repositories; a typical one measures about 72.3 × 60.8 mm and carries around 43 components.
100% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Gm study e1 by fm4dd.
Parts used alongside the TXB0104
Microcontrollers on boards using the TXB0104
What boards using the TXB0104 are built for
TXB0104: common questions
Where can I find a TXB0104 reference design?
Each of the 6 boards on this page is a real design using the TXB0104. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXB0104 VCCB pin?
The VCCB pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TXB0104.
What decoupling capacitors do designs use on the TXB0104 VCCA pin?
The VCCA pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the TXB0104.
How is the TXB0104 EN pin connected?
The EN pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TXB0104.
Which microcontrollers do boards using the TXB0104 use?
Most are built on AVR/Arduino (1), ESP32 (1) and STM32 (1).
How big is a typical board using the TXB0104?
The median is 72.3 × 60.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the TXB0104?
By GitHub stars, Gm study e1 by fm4dd, with 2 stars.
Can I simulate one of these boards using the TXB0104 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.