Spinali mcxn t1 hub
CogniPilot·spinali_mcxn_t1_hub·kicad/spinali_mcxn_t1_hub.kicad_pcb
About the Spinali mcxn t1 hub PCB
Spinali mcxn t1 hub is an open source PCB design by CogniPilot, published on GitHub under the Apache-2.0 license. It is a 6-layer board measuring 36.5 × 46 mm, with 203 components from 99 distinct parts.
Other key parts include the LM74700, NX5P3363UKZ, LM5160DNTJ, MIC5504-1.8YMT and MPM3811GG-Z. By type, the board carries 95 capacitors, 52 resistors, 15 ICs, 15 diodes, 10 connectors and 10 inductors.
From the project
MCXN T1 hub Schematic and Design Files
MR-MCXN-T1 Top view | MR-MCXN-T1 Bottom view :-------------------------:|:-------------------------: |
All pin data below comes from the KiCad design files in this repository.
Each card shows, per pin, the function, the net name in the schematic and the MCU pad the signal ends up on. Parts in between, such as the CAN transceivers and the Ethernet PHY, are shown too. Pin 1 is the square pad.
Main components on the Spinali mcxn t1 hub
Spinali mcxn t1 hub bill of materials (BOM)
203 components, 99 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM74700 | SOT-23-6 | U1 |
| 2 | NX5P3363UKZ | BGA16C50P4X4_220X220X60 | U2, U4 |
| 1 | LM5160DNTJ | SON50P400X400X100-13N | U3 |
| 1 | MIC5504-1.8YMT | VREG_MIC5504-3.3YMT-TZ | U5 |
| 1 | MPM3811GG-Z | QFN2x2x1p6_MPM3811_MNP | U6 |
| 1 | MCXN947VDFT | BGA184_0P5_9X9_SM | U7 |
| 1 | PCMF1USB3SZ | PESD1USB3BCX | U8 |
| 1 | ICM-45686 | IC_ICM-45686 | U9 |
| 1 | BMM350 | BGA9C40P3X3_128X128X54 | U10 |
| 1 | BMP581 | BMP581 | U11 |
| 2 | TJA1462ATK | SON65P300X300X100-9N-D | U12, U13 |
| 1 | SK9822-EC20 | SK9822EC20 | U14 |
| 1 | TJA1103AHN | HVQFN36_SOT1092-2_NXP | U15 |
| 1 | BUK6D56-60EX | BUK6D5660EX | Q1 |
| 1 | BC846BM,315 | Diodes_DFN1006-3 | Q2 |
| 1 | 24MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 25MHz | XRCGB25M000F3A00R0 | Y3 |
| 1 | 5055780421 | CONN_5055780421_MOL | J1 |
| 1 | USB4105-GF-A | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
Show 79 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAN0A | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J3 |
| 1 | CAN0B | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J4 |
| 1 | Debug | JST_SH_SM10B-SRSS-TB_1x10-1MP_P1.00mm_Horizontal | J5 |
| 1 | CAN1A | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J6 |
| 1 | CAN1B | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J7 |
| 2 | DF40TC(3.0)-50DP-0.4V(51) | DF40TC(3.0)-50DP-0.4V(51) | J8, J9 |
| 1 | RTC_BAT | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J13 |
| 1 | ISP | NanoTxxxAS | SW1 |
| 1 | 6DFN56CA-M3/I | DFN3820A | D1 |
| 1 | VBUS | LED_0402_1005Metric | D2 |
| 1 | 5V-IND | LED_0402_1005Metric | D3 |
| 2 | 3V3-IND | LED_0402_1005Metric | D4, D5 |
| 1 | BAT54C | SOT-23 | D6 |
| 1 | PESD5V0S1UL | PESD5V0S1ULD315 | D7 |
| 2 | ESD7104MUTAG | ESD8104MUTAG | D8, D9 |
| 2 | PESD2IVN24-UX | SOT-323_SC-70 | D10, D11 |
| 1 | LED_AMB | LED_0603_1608Metric | D12 |
| 1 | LED_GRN | LED_0603_1608Metric | D13 |
| 1 | PESD2ETH1G-T | SOT-23 | D14 |
| 1 | BAT54HT1G | D_SOD-323 | D15 |
| 1 | ACM7060-301-2PL-TL01 | ACM70603012PLTL01 | L1 |
| 1 | 22uH 1.8A | VLS5045EX330M | L2 |
| 1 | 120 Ohm | L_0402_1005Metric | L3 |
| 1 | 1uH | L_0603_1608Metric | L4 |
| 1 | 600 Ohm 2A | L_0805_2012Metric | L5 |
| 2 | IFLN1210BEER512N | IFLN1210BEER512N | L6, L7 |
| 2 | 600 Ohm | L_0402_1005Metric | L8, L9 |
| 1 | ACT1210L-201-2P-TL00 | ACT1210L1012PTL00 | L10 |
| 2 | 1nF 100V | C_0402_1005Metric | C1, C2 |
| 1 | 22nF 100V | C_0603_1608Metric | C3 |
| 2 | 10uF 100V | C_1210_3225Metric | C4, C10 |
| 2 | 100nF 100V | C_0603_1608Metric | C5, C11 |
| 5 | 10uF 10V | C_0805_2012Metric | C6, C14, C15, C19, C22 |
| 2 | 10uF 16V | C_0805_2012Metric | C7, C82 |
| 2 | 1nF 16V | C_0402_1005Metric | C8, C18 |
| 1 | 10nF 25V | C_0402_1005Metric | C9 |
| 18 | 100nF 16V | C_0402_1005Metric | C12, C20, C21, C57, C60, C61, C62, C63 +10 |
| 1 | 22uF 10V | C_1206_3216Metric | C13 |
| 1 | 22nF 16V | C_0402_1005Metric | C16 |
| 1 | 1uF 25V | C_0603_1608Metric | C17 |
| 6 | 1uF 10V | C_0402_1005Metric | C23, C24, C56, C68, C73, C77 |
| 4 | 4.7pF 50V | C_0402_1005Metric | C25, C26, C27, C28 |
| 5 | 1uF 6.3V | C_0402_1005Metric | C29, C33, C39, C43, C44 |
| 18 | 100nF 10V | C_0201_0603Metric | C30, C31, C32, C34, C35, C36, C37, C38 +10 |
| 1 | 2.2uF 10V | C_0402_1005Metric | C48 |
| 2 | 10uF 6.3V | C_0603_1608Metric | C49, C50 |
| 1 | 4.7uF 6.3V | C_0603_1608Metric | C52 |
| 1 | 1uF 50V | C_0805_2012Metric | C55 |
| 1 | 10nF 16V | C_0402_1005Metric | C59 |
| 1 | 2.2uF 16V | C_0805_2012Metric | C64 |
| 2 | 47nF 10V | C_0402_1005Metric | C67, C72 |
| 4 | 56pF 10V | C_0402_1005Metric | C69, C71, C74, C76 |
| 2 | 4700pF | C_0402_1005Metric | C70, C75 |
| 4 | 1uF 16V | C_0603_1608Metric | C79, C86, C88, C89 |
| 2 | 10pF 16V | C_0402_1005Metric | C90, C91 |
| 2 | 100nF 50V | C_0402_1005Metric | C92, C93 |
| 1 | 4700pF 50V | C_0402_1005Metric | C94 |
| 3 | 2k2 1% | R_0402_1005Metric | R1, R6, R8 |
| 2 | 30k 1% | R_0402_1005Metric | R2, R9 |
| 1 | 100k 1% 75V | R_0603_1608Metric | R3 |
| 1 | 68k 1% 75V | R_0603_1608Metric | R4 |
| 1 | 3k3 1% | R_0402_1005Metric | R5 |
| 1 | 12k 1% 75V | R_0603_1608Metric | R7 |
| 1 | 100k | R_0402_1005Metric | R10 |
| 1 | 82k 1% | R_0402_1005Metric | R11 |
| 2 | 1k5 | R_0402_1005Metric | R12, R13 |
| 1 | 18k 1% | R_0402_1005Metric | R14 |
| 16 | 10k | R_0402_1005Metric | R15, R16, R17, R18, R19, R21, R32, R33 +8 |
| 1 | 1M | R_0402_1005Metric | R20 |
| 2 | 100 | R_0603_1608Metric | R22, R29 |
| 2 | 5.1k | R_0402_1005Metric | R23, R24 |
| 4 | 0R | R_0402_1005Metric | R25, R26, R49, R52 |
| 4 | 60.4R 1% 1/3W | R_0603_1608Metric | R27, R28, R30, R31 |
| 2 | 680 | R_0402_1005Metric | R37, R38 |
| 2 | 15 | R_0402_1005Metric | R42, R43 |
| 2 | 1k 2/5W | R_0805_2012Metric | R44, R45 |
| 1 | 100k 1/10W | R_0402_1005Metric | R46 |
| 1 | 390k | R_0402_1005Metric | R50 |
| 1 | 75R | R_0402_1005Metric | R51 |
Spinali mcxn t1 hub design files
The KiCad project lives in the CogniPilot/spinali_mcxn_t1_hub repository on GitHub; these links point at the commit this page was built from.
Spinali mcxn t1 hub: common questions
How big is the Spinali mcxn t1 hub PCB?
The Spinali mcxn t1 hub measures 36.5 × 46 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Spinali mcxn t1 hub?
203 components, from 99 distinct parts. The full bill of materials is listed on this page.
Where can I download the Spinali mcxn t1 hub design files?
From the CogniPilot/spinali_mcxn_t1_hub repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Spinali mcxn t1 hub design in my own project?
Yes, under the terms of its Apache-2.0 license, which CogniPilot chose for the repository.