33 open source boards using the ICM-45686
Real designs built with the ICM-45686, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Simpleflightcontroller
notaroomba
40 × 46 mm79 parts2LNo license19Spinali mcxn t1 hub
CogniPilot
36.5 × 46 mm203 parts6LApache-2.02STM32
GRAVITAS
GoTouchGra55
60 × 84.3 mm111 parts4LMIT1ChariotFC
Rispats
272.4 × 570.4 mm106 parts2LNo license1STM32
STM32-FC
NARAE-INHA-UNIV
50 × 70 mm106 parts4LNo license1ESP32
Koganeee
Sujay-Golla
66 × 71 mm92 parts4LMIT1STM32
Tripod-Controller
GoTouchGra55
50.5 × 64 mm83 parts4LMIT1STM32
STM32-FlightController
premvy
40 × 44.8 mm79 parts2LMIT1STM32
Polaris
nsreeni07
40 × 44.8 mm79 parts2LMIT1RP2040/RP2350
Sol-Mk.-I
HIIACODER
78.2 × 46.8 mm72 parts4LMIT1Nordic nRF
NRFBlueSlime-Tracker-HW
wb1016
27.3 × 28.6 mm61 parts4LMIT1STM32
Bluetooth and-Mioty-Localization-Hardware
Chandubreddy819
36 × 36 mm58 parts4LNo license1ESP32
Felső panel
NBence0
120.1 × 70.2 mm274 parts6LNo license0STM32
Fc h743
dvntekim
50 × 50 mm178 parts6LNo license0RP2040/RP2350
Version2
rice-eclipse
50.8 × 87 mm130 parts4LNo license0STM32
Jfox fmu
Jettanakorn
100 × 80 mm125 parts6LNo license0STM32
Quadcopter-Flight-Controller
Ari-Hetti
51.3 × 55.3 mm119 parts2LMIT0STM32
Flight-Controller for rockets
epicgamer720
40 × 52.5 mm101 parts2LNo license0STM32
Boreas
darshg321
50 × 50 mm92 parts2LNo license0STM32
HoG
GoTouchGra55
60 × 60 mm92 parts6LMIT0STM32
Aerix core
FBIopeningUPP
29 × 29 mm91 parts8LNo license0STM32
FlightX
Shubhkr08
40.8 × 46.2 mm85 parts2LNo license0STM32
FlightWing
adirock09
40.8 × 46.2 mm82 parts2LNo license0STM32
FlightController
Acidicts
46 × 42.7 mm79 parts2LNo license0STM32
Flighttt-Controller
juanfierro4892
52.5 × 58.1 mm79 parts2LNo license0STM32
Flight-Controller
Mithilessh2010
40 × 46 mm79 parts2LNo license0STM32
The-Flying-Charizard
sahilchess
50 × 56 mm79 parts2LNo license0STM32
Flight controller
GodOfStrategy
77.4 × 45.1 mm78 parts2LNo license0Nordic nRF
Smd smores
infopcgood
18 × 21.1 mm50 parts2LNo license0RISC-V
Barsotion-PL1
Barsy-Barsevich
33 × 20 mm47 parts4LMIT0ESP32
Slime2
ntxngle
30.9 × 19.6 mm25 parts4LNo license0- schematic only · 33 partsESP32
SlimeVR-Tracker-ESP-Hardware
HelaFaye
33 partsApache-2.00 Nordic nRF
Cryo-Sentinel
jayis1
95 × 65 mm23 parts2LNo license0
How designs wire the ICM-45686
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the ICM-45686 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 27 of 31 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 27 of 31 designs, most often 100 nF (then 1 µF).
- The RESV/AUX1_CS pin is left unconnected on 28 of 31 designs (GND on 3).
- The RESV/AUX1_SDO pin is left unconnected on 28 of 31 designs (GND on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESV/AUX1_SDIO/AUX1_SDI/pin 2 | Connected to: Not connected 84% | — |
| RESV/AUX1_SCLK/MAS_CLKpin 3 | Connected to: Not connected 87% | — |
| VDDIOpin 5 | Connected to: 3.3V 90% |
|
| GNDpin 6 | Connected to: GND 97% | — |
| RESVpin 7 | Connected to: Not connected 81% · GND 16% | — |
| VDDpin 8 | Connected to: 3.3V 90% |
|
| RESV/AUX1_CSpin 10 | Connected to: Not connected 90% | — |
| RESV/AUX1_SDOpin 11 | Connected to: Not connected 90% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Simpleflightcontroller by notaroomba, Spinali mcxn t1 hub by CogniPilot, Bluetooth and-Mioty-Localization-Hardware by Chandubreddy819 and GRAVITAS by GoTouchGra55.
The ICM-45686 in open source designs
The gallery holds 33 open source boards using the ICM-45686 from 33 GitHub repositories; a typical one measures about 50 × 48.4 mm and carries around 82 components.
50% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Simpleflightcontroller by notaroomba.
Parts used alongside the ICM-45686
Microcontrollers on boards using the ICM-45686
What boards using the ICM-45686 are built for
ICM-45686: common questions
Where can I find a ICM-45686 reference design?
Each of the 33 boards on this page is a real design using the ICM-45686. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICM-45686 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 27 of 31 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the ICM-45686.
What decoupling capacitors do designs use on the ICM-45686 VDD pin?
The VDD pin has a decoupling capacitor on 27 of 31 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the ICM-45686.
How is the ICM-45686 RESV/AUX1_CS pin connected?
The RESV/AUX1_CS pin is left unconnected on 28 of 31 designs (GND on 3). Counted from the KiCad layouts of 32 open source designs using the ICM-45686.
What parts are used alongside the ICM-45686?
The BMP580, BQ25883RGER, LMR51430, TPS63070RNMR and STM32F722RETX appear in the most repositories here.
Which microcontrollers do boards using the ICM-45686 use?
Most are built on STM32 (21), ESP32 (4), Nordic nRF (3) and RP2040/RP2350 (2).
How big is a typical board using the ICM-45686?
The median is 50 × 48.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the ICM-45686?
By GitHub stars, Simpleflightcontroller by notaroomba, with 19 stars.
Can I simulate one of these boards using the ICM-45686 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.