8 open source boards using the BMM350
Real designs built with the BMM350, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
OpenBikeComputer
timohueser
37 × 61 mm10 parts2LGPL-3.08Spinali mcxn t1 hub
CogniPilot
36.5 × 46 mm203 parts6LApache-2.02ESP32
Pebble
Yatekii
129 × 129 mm163 parts4LNo license0ESP32
Windsensor
kristofkatzenberger
70 × 70 mm123 parts4LMIT0STM32
QUADCOPTER
Riskerx
55.9 × 55.9 mm99 parts4LNo license0Betr kicad resources
TheUnknownAlias
56.6 × 39 mm85 parts4LCustom license0Imu mouse hw
LassiHeikkila
50 × 81 mm63 parts4LNo license0Magnetometer Dev Board
Purdue-Space-Program
22 × 28 mm5 parts2LNo license2
How designs wire the BMM350
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the BMM350 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The CRST pin has a capacitor to GND on 6 of 7 designs, most often 2.2 µF.
- The ADSEL pin is tied to GND on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin A2 | Connected to: BMI270 57% |
|
| SCKpin A3 | Connected to: BMI270 57% |
|
| GNDpin B1 | Connected to: GND 100% | — |
| ADSELpin B2 | Connected to: GND 100% | — |
| VDDIOpin B3 | Connected to: 3.3V 100% |
|
| VDDpin C1 | Connected to: 1.8V 86% |
|
| CRSTpin C2 | Connected to: Signal 100% |
|
| BYPASSpin C3 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spinali mcxn t1 hub by CogniPilot, Magnetometer Dev Board by Purdue-Space-Program, Windsensor by kristofkatzenberger and Imu mouse hw by LassiHeikkila.
The BMM350 in open source designs
The gallery holds 8 open source boards using the BMM350 from 8 GitHub repositories; a typical one measures about 52.9 × 58.4 mm and carries around 92 components.
75% use four copper layers or more, and 38% carry an open source license.
The most starred is OpenBikeComputer by timohueser.
Microcontrollers on boards using the BMM350
What boards using the BMM350 are built for
BMM350: common questions
Where can I find a BMM350 reference design?
Each of the 8 boards on this page is a real design using the BMM350. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BMM350 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the BMM350.
What decoupling capacitors do designs use on the BMM350 VDD pin?
The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the BMM350.
How is the BMM350 CRST pin connected?
The CRST pin has a capacitor to GND on 6 of 7 designs, most often 2.2 µF. Counted from the KiCad layouts of 7 open source designs using the BMM350.
Which microcontrollers do boards using the BMM350 use?
Most are built on ESP32 (2), Nordic nRF (1) and STM32 (1).
How big is a typical board using the BMM350?
The median is 52.9 × 58.4 mm, and 25% are two-layer designs.
What is the most popular open source board using the BMM350?
By GitHub stars, OpenBikeComputer by timohueser, with 8 stars.
Can I simulate one of these boards using the BMM350 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.