GhostMesh
About the GhostMesh PCB
GhostMesh is an open source PCB design by ComplacencyKillz, published on GitHub under the MIT license. It is a 2-layer board measuring 67.4 × 42 mm, with 23 components from 20 distinct parts.
Other key parts include the Heltec V3/V4. By type, the board carries 11 connectors, 6 resistors, 2 transistors, 2 diodes, 1 IC and 1 switch.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
Meshtastic + Flipper Zero integration for offline red team comms — remote Bad USB, killswitch, and mesh-based C2 over LoRa
A deployable red-team mesh platform — planted sensors, encrypted command-and-control, line-of-sight control, and a destruct — running on nothing the target owns.
GhostMesh is a backpack that snaps onto a Flipper Zero — then detaches and stays in the field. Attached, it turns your Flipper into a long-range mesh radio: messaging and control over LoRa, no phone, no cell, no internet, nothing the target controls. Detached and planted, it becomes an autonomous node — watching its own perimeter, holding its place on the mesh, and taking orders by line-of-sight IR from you or over the encrypted…
Main components on the GhostMesh
GhostMesh bill of materials (BOM)
23 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Heltec V3/V4 | heltech v4 | U1 |
| 1 | PN2222A | TO-92_Inline | Q1 |
| 1 | IRLZ44N | TO-220-3_Vertical | Q3 |
| 1 | Flipper_8_pin | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Flipper_10_pin | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | Ulrasonic | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | IR_Receiver | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | BME_280 | PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | MAX17048 | PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | GPS.v3 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Tilt | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Switch | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Buzzer | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | coin | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | SW_Wipe | SW_PUSH-12mm | SW2 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | R_Photo | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R6 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
GhostMesh design files
The KiCad project lives in the ComplacencyKillz/GhostMesh repository on GitHub; these links point at the commit this page was built from.
GhostMesh: common questions
How big is the GhostMesh PCB?
The GhostMesh measures 67.4 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GhostMesh?
23 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the GhostMesh design files?
From the ComplacencyKillz/GhostMesh repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the GhostMesh design in my own project?
Yes, under the terms of its MIT license, which ComplacencyKillz chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956