HardLabs

Fx blocks

cookiemonsternz·fx-blocks·hardware/input-block/input-block/input-block.kicad_pcb

Fx blocks PCB layout, top view — open source AVR/Arduino board by cookiemonsternz

About the Fx blocks PCB

Fx blocks is an open source AVR/Arduino PCB design by cookiemonsternz, published on GitHub. It is a 2-layer board measuring 55 × 25 mm, with 43 components from 33 distinct parts.

Its main chip is the ATtiny1616-M, from the AVR/Arduino family. Other key parts include the TL072 and TPS5430DDA. By type, the board carries 16 resistors, 12 capacitors, 5 connectors, 3 ICs, 3 diodes and 2 switches.

Main components on the Fx blocks

ATtiny1616-MTL072TPS5430DDA

Fx blocks bill of materials (BOM)

43 components, 33 distinct parts.

QtyPartRefs
1
ATtiny1616-M
U1
1
TL072
U2
1
TPS5430DDA
U3
1
Pogo Output
J1
1
Jack-DC
J2
1
AudioJack2
J3
1
Conn_02x04_Odd_Even
J4
1
Conn_01x03
J5
1
SW_SPDT
SW1
1
SW_SPST
SW2
1
D_Schottky
D1
1
3.3V LED
D2
1
D
D7
1
FerriteBead
FB1
1
10uH 3A
L1
3
100nF
C1, C3, C5
1
1uF
C2
4
10uF
C4, C6, C7, C8
1
10uF 25V
C9
1
470uF
C10
Show 13 more
QtyPartRefs
1
10nF
C11
1
47uF
C12
2
4.7k
R1, R2
2
10k
R3, R8
1
2.4k
R4
2
100k
R5, R6
2
1M
R7, R11
1
3.3k
R9
1
2k
R10
2
750R
R12, R13
1
1K
R14
1
1.5K
R15
1
4.7k
R16

Fx blocks design files

The KiCad project lives in the cookiemonsternz/fx-blocks repository on GitHub; these links point at the commit this page was built from.

Fx blocks: common questions

What microcontroller does the Fx blocks use?

The Fx blocks is built around the ATtiny1616-M, from the AVR/Arduino family.

How big is the Fx blocks PCB?

The Fx blocks measures 55 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fx blocks?

43 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fx blocks design files?

From the cookiemonsternz/fx-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Fx blocks design in my own project?

The repository has no license, so all rights stay with cookiemonsternz. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fx blocks without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards