Compact cm5-desktop

CopperPilot·desktop-computer-retro·modules/desktop/hardware/compact-cm5-desktop.kicad_pcb

Compact cm5-desktop PCB layout, top view — open source Raspberry Pi board by CopperPilot

About the Compact cm5-desktop PCB

Compact cm5-desktop is an open source Raspberry Pi PCB design by CopperPilot, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 180 × 245 mm, with 61 components from 21 distinct parts.

Its main chip is the DF40C-100DS-0.4V(51), from the Raspberry Pi family.

It belongs with the keyboards and retro computing designs in this gallery.

From the project

A 1980s-style all-in-one desktop around a Raspberry Pi CM5 with a 58-key mechanical keyboard and a one-button mouse: four KiCad boards across three modules, 15 V USB-C PD power. Designed end to end by CopperPilot, open for review.

Generated from rea/spec.yaml by rea-hardware (fab rules, stackup, outline at the origin, mounting holes), then completed by the electrical agent. Every placed part carries a verified LCSC field.

1. Rear USB-C port JBOOT connects directly to UCM5 USB2P (Pin 105) and USB2N (Pin 103) with 90 ohm differential routing and no intervening USB hub. 2. JBOOT is configured as a USB-C sink with two independent 5.1 kOhm Rd pull-down resistors (RBOOTCC1, RBOOTCC2) to GND. 3. UCM5 USBOTGID (Pin 101) is left open on the carrier board to use the CM5's internal pull-up for device/OTG bootstrap mode without…

Compact cm5-desktop bill of materials (BOM)

61 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
HGC0805R5106K350NSLJ
10uF
C_3V3_1, C_3V3_IN, C_3V3_OUT1, C_3V3_OUT2, C_VIN1, C_VIN2
9
CL05B104KB54PNC
100nF
C_3V3_2, C_3V3_3, C_3V3_HF, C_5V4, C_CM5_1V8, C_CM5_5V, C_DSI_3V3, C_HDMI_5V +1
3
C2012X5R1A476MTJ00E
47uF
C_5V1, C_5V2, C_5V3
1
SA11AM101A19R15XXX
100uF
C_CM5_BULK
1
B5819W
D_3V3_CLAMP
8
TSD05CDYFR
D_BOOT_CC1, D_BOOT_CC2, D_KB_TVS1, D_KB_TVS2, D_MOUSE_TVS1, D_MOUSE_TVS2, D_PD_CC1, D_PD_CC2
3
TPD4E05U06DQAR
D_HDMI_ESD1, D_HDMI_ESD2, D_HDMI_ESD3
1
SPH4018H2R2MT
2.2uH
L_3V3
2
BSS138
Q_3V3_DIS, Q_3V3_INV
1
0402WGF1001TCE
1k
R_3V3_BLEED
5
0402WGF330JTCE
33R
R_3V3_DIS, R_SD_DAT0, R_SD_DAT1, R_SD_DAT2, R_SD_DAT3
3
0402WGF1002TCE
10k
R_3V3_DIS_PU, R_3V3_EN, R_BUCK_FB2
8
0402WGF1003TCE
100k
R_3V3_EN_PD, R_3V3_FB1, R_BUCK_EN1, R_PD_PG2, R_SD_DAT0_PU, R_SD_DAT1_PU, R_SD_DAT2_PU, R_SD_DAT3_PU
1
0402WGF2212TCE
22.1k
R_3V3_FB2
2
0402WGF5101TCE
5.1k
R_BOOT_CC1, R_BOOT_CC2
1
0402WGF2002TCE
20k
R_BUCK_EN2
1
0402WGF7322TCE
73.2k
R_BUCK_FB1
2
0402WGF0000TCE
0R
R_FIO_RET1, R_FIO_RET2
1
RC0402FR-0756KL
56k
R_PD_CFG1
1
TLV62569DBVR
U_3V3
Show 1 more
QtyPartRefs
1
DF40C-100DS-0.4V(51)
U_CM5

Compact cm5-desktop design files

The KiCad project lives in the CopperPilot/desktop-computer-retro repository on GitHub; these links point at the commit this page was built from.

Compact cm5-desktop: common questions

What microcontroller does the Compact cm5-desktop use?

The Compact cm5-desktop is built around the DF40C-100DS-0.4V(51), from the Raspberry Pi family.

How big is the Compact cm5-desktop PCB?

The Compact cm5-desktop measures 180 × 245 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Compact cm5-desktop?

61 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Compact cm5-desktop design files?

From the CopperPilot/desktop-computer-retro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Compact cm5-desktop design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which CopperPilot chose for the repository.

Can I test firmware for the Compact cm5-desktop without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in desktop-computer-retro

Similar boards