PiESC
CoPYGolF97·PiESC·Hardware/PiESC_S1_PCB20x50/PiESC_S1_PCB20x50.kicad_pcb
About the PiESC PCB
PiESC is an open source PCB design by CoPYGolF97, published on GitHub. It is a 4-layer board measuring 20 × 50 mm, with 28 components from 10 distinct parts.
Other key parts include the FD6288Q and INA180A2. By type, the board carries 12 resistors, 6 transistors, 5 capacitors and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
Open-source 3-phase BLDC ESC firmware and hardware for RP2350-based multirotor aircraft.
Initial hardware design for the PiESC project.
Board size: 20 × 50 mm 4-layer PCB Target current: 30A / 45A 3-phase brushless motor ESC RP2350-based control platform Battery voltage target: approximately 12–16 V
Main components on the PiESC
PiESC bill of materials (BOM)
28 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FD6288Q | QFN50P400X400X90-25N | U1 |
| 1 | INA180A2 | SOT-23-5 | U4 |
| 6 | AON34356 | PQFN-8-EP_6x5mm_P1.27mm_Generic | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | 2mΩ | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | RSH1 |
| 1 | 100k | R_0805_2012Metric | RVB1 |
| 1 | 20k | R_0805_2012Metric | RVB2 |
| 1 | 10uF 50V MLCC | C_1206_3216Metric | C2 |
| 4 | 100nF 50V MLCC | C_0805_2012Metric | C3, C4, C5, C6 |
| 6 | 10R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R7, R9, R11 |
| 6 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R8, R10, R12 |
PiESC design files
The KiCad project lives in the CoPYGolF97/PiESC repository on GitHub; these links point at the commit this page was built from.
PiESC: common questions
How big is the PiESC PCB?
The PiESC measures 20 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PiESC?
28 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the PiESC design files?
From the CoPYGolF97/PiESC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PiESC design in my own project?
The repository has no license, so all rights stay with CoPYGolF97. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979