Nucleo-CAN Interface
About the Nucleo-CAN Interface PCB
Nucleo-CAN Interface is an open source PCB design by corbosiny, published on GitHub. It is a 2-layer board measuring 59.1 × 51.4 mm, with 24 components from 20 distinct parts.
Other key parts include the PDS1-S12-S9-M, MCP1702T-5002E/CB, Nucleo_L432KC and ADM3054. By type, the board carries 6 capacitors, 6 resistors, 4 ICs, 4 diodes, 2 connectors and 1 jumper.
It belongs with the power & battery designs in this gallery.
From the project
All code relating to solar car like: BPS, telemetry, web dev, and more.
Main components on the Nucleo-CAN Interface
Nucleo-CAN Interface bill of materials (BOM)
24 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PDS1-S12-S9-M | PDS1-M | U1 |
| 1 | MCP1702T-5002E/CB | SOT-23W | U2 |
| 1 | Nucleo_L432KC | NucleoL432KC | U3 |
| 1 | ADM3054 | SOIC-16W_7.5x10.3mm_Pitch1.27mm | U4 |
| 1 | CAN_In | Molex-MiniFitJr-4-peg | J1 |
| 1 | CAN_Out | Molex-MiniFitJr-4-peg | J2 |
| 1 | CAN Resistors | SL-102-X-XX_1x02 | JP1 |
| 1 | Reset | SW_PUSH_6mm | SW1 |
| 1 | 12V Iso Power | LED_0805_HandSoldering | D1 |
| 1 | 5V Iso Power | LED_0805_HandSoldering | D2 |
| 1 | 9V Power | LED_0805_HandSoldering | D3 |
| 1 | 3.3V Power | LED_0805_HandSoldering | D4 |
| 1 | 2.2u | C_0805_HandSoldering | C1 |
| 1 | 4.7u | C_0805_HandSoldering | C2 |
| 4 | 0.1u | C_0805_HandSoldering | C3, C4, C5, C6 |
| 1 | 1k | R_0805_HandSoldering | R1 |
| 1 | 330 | R_0805_HandSoldering | R2 |
| 1 | 510 | R_0805_HandSoldering | R3 |
| 1 | 160 | R_0805_HandSoldering | R4 |
| 2 | 60 | R_0805_HandSoldering | R5, R6 |
Nucleo-CAN Interface design files
The KiCad project lives in the corbosiny/SolarCar repository on GitHub; these links point at the commit this page was built from.
Nucleo-CAN Interface: common questions
How big is the Nucleo-CAN Interface PCB?
The Nucleo-CAN Interface measures 59.1 × 51.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nucleo-CAN Interface?
24 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nucleo-CAN Interface design files?
From the corbosiny/SolarCar repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Nucleo-CAN Interface design in my own project?
The repository has no license, so all rights stay with corbosiny. Use it as a reference, and ask the author before reusing the design.
More boards in SolarCar
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k