UT SVT MPPT 2018
About the UT SVT MPPT 2018 PCB
UT SVT MPPT 2018 is an open source PCB design by corbosiny, published on GitHub. It is a 2-layer board measuring 172.7 × 116.8 mm, with 97 components from 60 distinct parts.
Other key parts include the PQMC3-D12-S9-S, Nucleo_L432KC, UCC37321, INA210 and ADM3055E. By type, the board carries 25 resistors, 24 capacitors, 14 diodes, 9 LEDs, 7 ICs and 5 connectors.
It belongs with the power & battery designs in this gallery.
From the project
All code relating to solar car like: BPS, telemetry, web dev, and more.
Main components on the UT SVT MPPT 2018
UT SVT MPPT 2018 bill of materials (BOM)
97 components, 60 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PQMC3-D12-S9-S | CUI_PQMC3-S | U1 |
| 1 | Nucleo_L432KC | NucleoL432KC | U2 |
| 1 | UCC37321 | SOIC-8_4.00x5.00mm_Pitch1.27mm | U3 |
| 2 | INA210 | SOIC-6_1.40x2.15mm_Pitch0.65mm | U4, U6 |
| 1 | ADM3055E | SOIC-20W_7.5x15.4mm_Pitch1.27mm | U5 |
| 1 | CDSOT23-T24CAN | SOT-23W_Handsoldering | U7 |
| 2 | NMOS | TO-247_TO-3P_Vertical | Q1, Q2 |
| 1 | Solar Array | PhoenixContact_PowerCombicon5_GF_3x7.62mm | J1 |
| 1 | Battery | PhoenixContact_PowerCombicon5_GF_2x7.62mm | J2 |
| 1 | Car Power | Molex_MicroFit3.0_1x2xP3.00mm_PolarizingPeg_Vertical | J3 |
| 1 | CAN_In | Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_Vertical | J4 |
| 1 | CAN_Out | Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_Vertical | J5 |
| 1 | Fuse | LittelFuse_OMNIBLOK_520Series_PCB | F1 |
| 3 | Heatsink_Fischer_SK129-STS_42x25mm_2xDrill2.5mm | Heatsink_Fischer_SK129-STS_42x25mm_2xDrill2.5mm | HS1, HS2, HS3 |
| 1 | Termination Resistors | Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | CAN Address | SW_DIP_x4_W7.62mm_Slide_LowProfile | SW2 |
| 1 | Array Live? | LED_0805_HandSoldering | LED1 |
| 1 | Battery Live? | LED_0805_HandSoldering | LED2 |
| 1 | Car Power Live? | LED_0805_HandSoldering | LED3 |
Show 40 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery Full? | LED_0805_HandSoldering | LED4 |
| 1 | Tracking? | LED_0805_HandSoldering | LED5 |
| 1 | PWM | LED_0805_HandSoldering | LED6 |
| 1 | Iso 9V Live? | LED_0805_HandSoldering | LED7 |
| 1 | CAN_Tx | LED_0805_HandSoldering | LED8 |
| 1 | CAN_Rx | LED_0805_HandSoldering | LED9 |
| 3 | Schottky | TO-220-2_Vertical | D1, D2, D3 |
| 1 | 18V Zener | D_SMA_Handsoldering | D4 |
| 5 | 4V Zener | D_SOD-123F | D5, D7, D9, D11, D13 |
| 5 | Diode | D_SOD-123 | D6, D8, D10, D12, D14 |
| 1 | 560uH | L_Toroid_Vertical_L46.0mm_W19.1mm_P21.80mm_Bourns_5700 | L1 |
| 2 | 2k | L_0805_HandSoldering | L2, L3 |
| 1 | 4.7u | L_0805_HandSoldering | L4 |
| 2 | 1000uF | CP_Radial_D31mm_P9mm | C1, C2 |
| 1 | CP | C_Rect_L26.5mm_W17.0mm_P22.50mm_MKS4 | C3 |
| 1 | 47u | CP_Elec_6.3x5.3 | C4 |
| 2 | 100u | CP_Elec_6.3x7.7 | C5, C24 |
| 3 | 0.1u | C_0805_HandSoldering | C6, C8, C11 |
| 1 | 1u | CP_Radial_D10.0mm_P5.00mm | C7 |
| 2 | 10u | C_0805_HandSoldering | C9, C23 |
| 1 | 0.22u | C_0805_HandSoldering | C10 |
| 1 | 0.01u | C_0805_HandSoldering | C12 |
| 1 | 10u | C_0805 | C13 |
| 2 | 0.1u | C_0805 | C14, C15 |
| 1 | 0.01u | C_0805 | C16 |
| 2 | 0.1uF | C_0805_HandSoldering | C17, C18 |
| 4 | 1uF | C_0805_HandSoldering | C19, C20, C21, C22 |
| 1 | R | R_Axial_Power_L20.0mm_W6.4mm_P22.40mm | R1 |
| 1 | 10k | R_1206_HandSoldering | R2 |
| 2 | 100k | R_1206_HandSoldering | R3, R4 |
| 2 | 2k | R_1206_HandSoldering | R5, R6 |
| 1 | 1R5 | R_1206_HandSoldering | R7 |
| 2 | 2m | R_2512_HandSoldering | R8, R11 |
| 2 | 60 | R_0805_HandSoldering | R9, R10 |
| 2 | 40K | R_1206_HandSoldering | R12, R13 |
| 1 | 2K | R_0805_HandSoldering | R14 |
| 5 | 330R | R_0805_HandSoldering | R15, R16, R17, R21, R22 |
| 4 | 1.7k | R_0805_HandSoldering | R18, R19, R23, R24 |
| 1 | 1K | R_0805_HandSoldering | R20 |
| 1 | 0 | R_0805_HandSoldering | R25 |
UT SVT MPPT 2018 design files
The KiCad project lives in the corbosiny/SolarCar repository on GitHub; these links point at the commit this page was built from.
UT SVT MPPT 2018: common questions
How big is the UT SVT MPPT 2018 PCB?
The UT SVT MPPT 2018 measures 172.7 × 116.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UT SVT MPPT 2018?
97 components, from 60 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UT SVT MPPT 2018 design files?
From the corbosiny/SolarCar repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the UT SVT MPPT 2018 design in my own project?
The repository has no license, so all rights stay with corbosiny. Use it as a reference, and ask the author before reusing the design.
More boards in SolarCar
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k