Reginald-Voice-Satellite
CorbScout0152·Reginald-Voice-Satellite·hardware/pcb/kicad/Reginald-Voice-Satellite.kicad_pcb
About the Reginald-Voice-Satellite PCB
Reginald-Voice-Satellite is an open source ESP32 PCB design by CorbScout0152, published on GitHub. It is a 2-layer board measuring 96 × 96 mm, with 85 components from 12 distinct parts.
Its main chip is the ESP32-S3-WROOM-1u, from the ESP32 family. Other key parts include the AP2112K-3.3 and MAX98357A. By type, the board carries 40 capacitors, 32 diodes, 7 resistors, 3 ICs and 1 connector.
It belongs with the iot & wireless, audio and rf & radio designs in this gallery.
From the project
A custom ESPHome-based voice assistant satellite for Home Assistant, built on an ESP32-S3 with a 35-LED addressable ring, dual I2S audio (mic + speaker), on-device wake word detection, and a custom-trained wake word for its own name.
A custom ESPHome-based voice assistant satellite for Home Assistant, built on an ESP32-S3 with a 35-LED addressable ring, dual I2S audio (mic + speaker), on-device wake word detection, and a custom-trained wake word for its own name.
Currently on its third hardware revision — the first two used off-the-shelf modules; v3 is a fully custom PCB.
The v3 board integrates the 35-pixel WS2812 LED ring directly onto the PCB perimeter around a central ESP32-S3 module, audio codec components, and a USB-C connector — consolidating what was previously several separate off-the-shelf boards into one…

Main components on the Reginald-Voice-Satellite
Reginald-Voice-Satellite bill of materials (BOM)
85 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2 |
| 1 | ESP32-S3-WROOM-1u | ESP32-S3-WROOM-1U | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | INMP441 TDK InvenSense(应美盛) | MIC-SMD_INMP441 | LeftMic1, RightMic1 |
| 32 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1.1, D1.2, D1.3, D1.4, D1.5, D1.6, D1.7, D1.8 +24 |
| 37 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C1.1, C1.2, C1.3, C1.4, C1.5, C1.6, C1.7 +29 |
| 3 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 2 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
Reginald-Voice-Satellite design files
The KiCad project lives in the CorbScout0152/Reginald-Voice-Satellite repository on GitHub; these links point at the commit this page was built from.
Reginald-Voice-Satellite: common questions
What microcontroller does the Reginald-Voice-Satellite use?
The Reginald-Voice-Satellite is built around the ESP32-S3-WROOM-1u, from the ESP32 family.
How big is the Reginald-Voice-Satellite PCB?
The Reginald-Voice-Satellite measures 96 × 96 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Reginald-Voice-Satellite?
85 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Reginald-Voice-Satellite design files?
From the CorbScout0152/Reginald-Voice-Satellite repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Reginald-Voice-Satellite design in my own project?
The repository has no license, so all rights stay with CorbScout0152. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Reginald-Voice-Satellite without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k