HardLabs

Nanoleaf-Shapes controller

Cptmeme·Nanoleaf-Shapes-controller·hardware/nanoleaf_shapes.kicad_pcb

Nanoleaf-Shapes controller PCB layout, top view — open source board by Cptmeme
Simulate this board

About the Nanoleaf-Shapes controller PCB

Nanoleaf-Shapes controller is an open source PCB design by Cptmeme, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 35.6 × 21.5 mm, with 42 components from 25 distinct parts.

Other key parts include the TPS54360DDAR, WT0132C6-S5 and 74LVC1G125GV. By type, the board carries 21 capacitors, 10 resistors, 4 ICs, 2 connectors, 2 switches and 2 diodes.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Bus-powered half-duplex interface board between a 3.3 V MCU and the Nanoleaf Shapes panel bus

An open-source replacement controller for Nanoleaf Shapes panels. A small interface board plugs into a single panel edge and takes 42 V, GND and DATA from it: no stock controller and no separate power supply.

- WLED, with a native "Nanoleaf Shapes" LED output. You get effects, 2D effects laid out on the real panel shape, the WLED apps and Home Assistant. See wled/. - A standalone ESP-IDF firmware with a Wi-Fi console, status page, OTA updates and a DDP receiver. It's useful for bring-up, protocol work, or as a network target for another WLED instance. See firmware/. - Matter over Thread…

Main components on the Nanoleaf-Shapes controller

TPS54360DDARWT0132C6-S574LVC1G125GV

Nanoleaf-Shapes controller bill of materials (BOM)

42 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS54360DDAR
TI(德州仪器)
U1
1
WT0132C6-S5
U2
2
74LVC1G125GV
74LVC1G125GV_C52140413
MDD(辰达半导体)
U3, U4
2
Conn_01x03
J1, J2
1
TS-1088-AR02016
RESET
XUNPU(讯普)
SW1
1
TS-1088-AR02016
BOOT
XUNPU(讯普)
SW2
1
C14996
100V/2A Schottky
D1
1
C81598
D
D2
1
C20417191
33uH >2A sat
L1
3
C5449052
2.2uF 100V
C1, C2, C3
10
C1525
100nF 16V
C4, C5, C6, C7, C8, C9, C10, C18 +2
1
C47023097
22uF 100V
C11
1
C1664
330pF
C12
1
C1622
47nF
C13
3
C45783
22uF 25V
C14, C15, C16
1
C1530
220pF
C17
1
C52923
1uF
C21
1
C25879
2.2k
R1
1
C25792
47k
R2
1
C25756
15k
R3
Show 5 more
QtyPartRefs
1
C4211
3k
R4
1
C23137
330k
R5
2
C11702
1k
R6, R10
2
C25744
10k
R7, R9
1
C25091
220
R8

Nanoleaf-Shapes controller design files

The KiCad project lives in the Cptmeme/Nanoleaf-Shapes-controller repository on GitHub; these links point at the commit this page was built from.

Nanoleaf-Shapes controller: common questions

How big is the Nanoleaf-Shapes controller PCB?

The Nanoleaf-Shapes controller measures 35.6 × 21.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nanoleaf-Shapes controller?

42 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nanoleaf-Shapes controller design files?

From the Cptmeme/Nanoleaf-Shapes-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nanoleaf-Shapes controller design in my own project?

Yes, under the terms of its GPL-3.0 license, which Cptmeme chose for the repository.

Similar boards