E3088F-Project

crisrwats99·E3088F-Project·MM/MM.kicad_sch

This repository ships a schematic but no board layout.

About the E3088F-Project PCB

E3088F-Project is an open source PCB design by crisrwats99, published on GitHub. It is a board, with 18 components from 13 distinct parts.

Other key parts include the DRV8833PWPR and TP5100. By type, the board carries 6 capacitors, 4 resistors, 3 ICs, 2 switches, 2 diodes and 1 inductor.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

This repository contains the hardware design files for the power subsystem of a Micro-Mouse robot. The project was developed as part of the EEE3088F 2025 course at the University of Cape Town.

This repository contains the hardware design files for the power subsystem of a Micro-Mouse robot. The project was developed as part of the EEE3088F 2025 course at the University of Cape Town.

- /MM/ – Main schematic and PCB layout files (KiCad 7.0+) - README.md – Project documentation and instructions

The power module is responsible for delivering stable and regulated power to all other subsystems of the Micro-Mouse, including the processor, motors, and sensors. The key responsibilities of the subsystem include:

Main components on the E3088F-Project

E3088F-Project bill of materials (BOM)

18 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
DRV8833PWPR
U1, U2
1
TP5100
U3
2
C2890358
SW1, SW2
1
LED
D1
1
LED
D2
1
10u
L1
2
10uF
C1, C2
2
0.01uF
C3, C4
2
2.2uF
C5, C6
1
0603WAF1001T5E
0.15Ω
R1
1
0603WAF1001T5E
0.47Ω
R2
1
1Ω
R4
1
1kΩ
R6

E3088F-Project design files

The KiCad project lives in the crisrwats99/E3088F-Project repository on GitHub; these links point at the commit this page was built from.

E3088F-Project: common questions

How many components are on the E3088F-Project?

18 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the E3088F-Project design files?

From the crisrwats99/E3088F-Project repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the E3088F-Project design in my own project?

The repository has no license, so all rights stay with crisrwats99. Use it as a reference, and ask the author before reusing the design.

Similar boards