Mcp73831-lipo charger module
cryp71c·mcp73831-lipo-charger-module
About the Mcp73831-lipo charger module
Mcp73831-lipo charger module is an open source PCB design by cryp71c, published on GitHub. It is a 2-layer board measuring 21.9 × 12.6 mm, with 7 components from 6 distinct parts.
Other key parts include the MCP73831-2-OT.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Compact MCP73831-based 1-cell LiPo charger module
A compact single‑cell LiPo charger breakout built around the Microchip MCP73831 linear charger IC.
This board was designed as a modular power system for a custom handheld Dino PCB project, allowing safe USB charging of a single‑cell lithium polymer battery.
This project represents a first full PCB design cycle, covering schematic capture, PCB layout, DRC validation, fabrication, and assembly.
Main components on the Mcp73831-lipo charger module
Mcp73831-lipo charger module bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 2 | 1uF | CP_Radial_D5.0mm_P2.50mm | C_BATT1, C_IN1 |
| 1 | ~ | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J_BATT1 |
| 1 | ~ | PinHeader_1x02_P2.54mm_Vertical | J_IN1 |
| 1 | STAT Out | PinHeader_1x02_P2.54mm_Vertical | J_STAT1 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_PROG1 |
Mcp73831-lipo charger module design files
The KiCad project lives in the cryp71c/mcp73831-lipo-charger-module repository on GitHub; these links point at the commit this page was built from.
- LayoutMCP73831_Charger.kicad_pcb
- SchematicMCP73831_Charger.kicad_sch
Mcp73831-lipo charger module: common questions
How big is the Mcp73831-lipo charger module?
The Mcp73831-lipo charger module measures 21.9 × 12.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mcp73831-lipo charger module?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mcp73831-lipo charger module design files?
From the cryp71c/mcp73831-lipo-charger-module repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mcp73831-lipo charger module design in my own project?
The repository has no license, so all rights stay with cryp71c. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k