Digital-Clock
Cryptoblade9623·Digital-Clock·Files/KiCad/Clock.kicad_pcb
About the Digital-Clock PCB
Digital-Clock is an open source RP2040/RP2350 PCB design by Cryptoblade9623, published on GitHub. It is a 2-layer board measuring 75.5 × 75.5 mm, with 48 components from 8 distinct parts.
Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. Other key parts include the 74AHCT1G125. By type, the board carries 22 capacitors, 20 diodes, 2 ICs, 2 connectors and 1 resistor.
Main components on the Digital-Clock
Digital-Clock bill of materials (BOM)
48 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AHCT1G125 | SOT-23-5_HandSoldering | U1 |
| 1 | RP2040-ZERO | MODULE_RP2040-ZERO | U2 |
| 1 | Number Display | TM1637_4PIN_Module | J1 |
| 1 | DS3231 | Untitled_1 | J2 |
| 1 | 10V | C_Radial_D12.5mm_H25.0mm_P5.00mm | 1000uF1 |
| 20 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
| 22 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +14 |
| 1 | 330Ω | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
Digital-Clock design files
The KiCad project lives in the Cryptoblade9623/Digital-Clock repository on GitHub; these links point at the commit this page was built from.
- LayoutFiles/KiCad/Clock.kicad_pcb
- SchematicFiles/KiCad/Clock.kicad_sch
Digital-Clock: common questions
What microcontroller does the Digital-Clock use?
The Digital-Clock is built around the RP2040-ZERO, from the RP2040/RP2350 family.
How big is the Digital-Clock PCB?
The Digital-Clock measures 75.5 × 75.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Digital-Clock?
48 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digital-Clock design files?
From the Cryptoblade9623/Digital-Clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Digital-Clock design in my own project?
The repository has no license, so all rights stay with Cryptoblade9623. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Digital-Clock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k