Cyberboard usb
cybergear-robotics·cyberboard-usb
About the Cyberboard usb PCB
Cyberboard usb is an open source PCB design by cybergear-robotics, published on GitHub under the MIT license. It is a 4-layer board measuring 55 × 55 mm, with 40 components from 19 distinct parts.
Other key parts include the AMS1117-3.3, TJA1051T, D3V3XA4B10LP, ICM-20948 and TLV70018_SOT23-5. By type, the board carries 17 resistors, 8 capacitors, 5 ICs, 4 transistors, 2 connectors and 2 diodes.
From the project
PCB for CyberBot with USB connector
This is the Kicad project for the CyberBoard. It has an ESP32S3 which is connected via USB to a computer. The microcontroller drives the cybergear motors via CAN. Furthermore a MOLEX CLIK connector is integrated in order to communicate with the power distribution board Holybro PM03D Pixhawk 5X Power Module. This board does not only provides six XT-30 connectors for each cybergear motor, but also an INA226 i2c power monitor unit. The IMU ICM20948 is integrated on the CyberBoard.

Main components on the Cyberboard usb
Cyberboard usb bill of materials (BOM)
40 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | TJA1051T | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | D3V3XA4B10LP | Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U3 |
| 1 | ICM-20948 | QFN24_3X3X0P9_IVS | U5 |
| 1 | TLV70018_SOT23-5 | SOT-23-5 | U7 |
| 4 | AO3400A | SOT-23 | Q1, Q2, Q3, Q5 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | 5024940670 | Molex_CLIK-Mate_502494-0670_1x06-1MP_P2.00mm_Horizontal | J3 |
| 2 | SW_MEC_5E | SW_Push_1P1T_XKB_TS-1187A | ACTION1, RESET1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 1 | 1N4148W | D_SOD-123 | D3 |
| 3 | 0.1uF | C_0805_2012Metric | C1, C5, C6 |
| 3 | 10uF | C_0805_2012Metric | C2, C3, C4 |
| 2 | 1uF | C_0805_2012Metric | C12, C13 |
| 6 | 10k | R_0805_2012Metric | R1, R11, R16, R17, R18, R20 |
| 1 | 120 | R_0805_2012Metric | R2 |
| 1 | 4k7 | R_0805_2012Metric | R3 |
| 3 | 5.1k | R_0805_2012Metric | R4, R5, R8 |
| 6 | 4.7k | R_0805_2012Metric | R9, R10, R12, R13, R14, R19 |
Cyberboard usb design files
The KiCad project lives in the cybergear-robotics/cyberboard-usb repository on GitHub; these links point at the commit this page was built from.
- Layoutcyberboard.kicad_pcb
- Schematiccyberboard.kicad_sch
Cyberboard usb: common questions
How big is the Cyberboard usb PCB?
The Cyberboard usb measures 55 × 55 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cyberboard usb?
40 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cyberboard usb design files?
From the cybergear-robotics/cyberboard-usb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cyberboard usb design in my own project?
Yes, under the terms of its MIT license, which cybergear-robotics chose for the repository.