14 open source boards using the TLV70018_SOT23-5

Real designs built with the TLV70018_SOT23-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the TLV70018_SOT23-5

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TLV70018_SOT23-5 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 3.3V on 9 of 11 designs (a signal on 2).
  • The EN pin is tied to 3.3V on 8 of 11 designs (a signal on 3).
  • The OUT pin is tied to 1.8V on 8 of 11 designs (a signal on 3).
INpin 1Connected to: 3.3V 82% · a signal 18%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 3.3V 73% · a signal 27%
NCpin 4Connected to: Not connected 100%
OUTpin 5Connected to: 1.8V 73% · a signal 27%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dya panelized by cormoran, C2c-64 by jsanpe, N64rgb pcb by borti4938 and Black-Flipper by Broccoliux.

The TLV70018_SOT23-5 in open source designs

The gallery holds 14 open source boards using the TLV70018_SOT23-5 from 11 GitHub repositories; a typical one measures about 58.1 × 55.5 mm and carries around 50 components.

79% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.

The most starred is Dya panelized by cormoran.

Parts used alongside the TLV70018_SOT23-5

Microcontrollers on boards using the TLV70018_SOT23-5

TLV70018_SOT23-5: common questions

Where can I find a TLV70018_SOT23-5 reference design?

Each of the 14 boards on this page is a real design using the TLV70018_SOT23-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV70018_SOT23-5 IN pin connected?

The IN pin is tied to 3.3V on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the TLV70018_SOT23-5.

How is the TLV70018_SOT23-5 EN pin connected?

The EN pin is tied to 3.3V on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 11 open source designs using the TLV70018_SOT23-5.

How is the TLV70018_SOT23-5 OUT pin connected?

The OUT pin is tied to 1.8V on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 11 open source designs using the TLV70018_SOT23-5.

What parts are used alongside the TLV70018_SOT23-5?

The ICM-20948, AMS1117-3.3, PMW3610 and SN74AXC4T245PW appear in the most repositories here.

Which microcontrollers do boards using the TLV70018_SOT23-5 use?

Most are built on ESP32 (2), Raspberry Pi (2), AVR/Arduino (1) and Nordic nRF (1).

How big is a typical board using the TLV70018_SOT23-5?

The median is 58.1 × 55.5 mm, and 79% are two-layer designs.

What is the most popular open source board using the TLV70018_SOT23-5?

By GitHub stars, Dya panelized by cormoran, with 53 stars.

Can I simulate one of these boards using the TLV70018_SOT23-5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part