21 open source boards using the D3V3XA4B10LP
Real designs built with the D3V3XA4B10LP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Day 2 - Four Port USB-C
i2cjak
26 × 46.5 mm51 parts4LCERN-OHL-P-2.095Kicad latte panda mu
futureshocked
170.1 × 100 mm196 parts4LNo license4ESP32
ESP-32-Dev-Board
Fred98246
25.4 × 62.7 mm27 parts4LMIT2LattePanda-Mu-Lite-Custom-Carrier
gorkemguven
119.1 × 141.2 mm194 parts4LMIT0H616 devboard
Bogdan8266
50 × 50 mm165 parts8LCERN-OHL-P-2.00RP2040/RP2350
RP2040-Dual-TypeC-eMMC-Board
gorkemguven
63.7 × 41.1 mm124 parts4LMIT0ESP32
Mp3player
ILikeMice
55.5 × 54 mm65 parts2LNo license0ESP32
Air Quality Monitering System
SREE-VISHNU-N
72.3 × 33.7 mm54 parts4LNo license0ESP32
Durra NoteBook HW
meshalalhazmi
57.3 × 62.8 mm54 parts4LNo license0ESP32
Drishtikon
Debanx3
58.5 × 38.8 mm50 parts4LMIT0ESP32
LD2024 ESP32 Radar
Jack05325
98 × 28 mm42 parts2LNo license0Cyberboard usb
cybergear-robotics
55 × 55 mm40 parts4LMIT0ESP32
ESP32-S3-Dev-Board-Project
andresmoreno2702-gif
26.4 × 56.9 mm26 parts4LMIT0STM32
Day 03 ECG SPO2
i2cjak
26 × 30 mm36 parts4LCERN-OHL-P-2.095ESP32
Drishtikon
Debanx3
58.5 × 38.5 mm40 parts4LMIT0ESP32
Arduino Nano
SREE-VISHNU-N
43.2 × 17.8 mm33 parts4LNo license0Expansion Card Template
i2cjak
26 × 30 mm16 parts4LCERN-OHL-P-2.095ESP32
STM32 Hardware
SREE-VISHNU-N
41 × 31 mm24 parts2LNo license0Template
i2cjak
26 × 30 mm3 parts2LCERN-OHL-P-2.095ESP32
ESP32
SREE-VISHNU-N
25.9 × 64.3 mm16 parts4LNo license0ESP32
Excersice project
SREE-VISHNU-N
73 × 50 mm10 parts4LNo license0
How designs wire the D3V3XA4B10LP
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the D3V3XA4B10LP connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 3, 8 | Connected to: GND 96% | — |
| NCpin 6, 7, 9, 10 | Connected to: A connector 51%, the microcontroller 22% · not connected 35% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Expansion Card Template by i2cjak, Kicad latte panda mu by futureshocked, ESP-32-Dev-Board by Fred98246 and ESP32-S3-Dev-Board-Project by andresmoreno2702-gif.
The D3V3XA4B10LP in open source designs
The gallery holds 21 open source boards using the D3V3XA4B10LP from 13 GitHub repositories; a typical one measures about 55 × 46.5 mm and carries around 40 components.
81% use four copper layers or more, and 57% carry an open source license.
The most starred is Day 2 - Four Port USB-C by i2cjak.
Parts used alongside the D3V3XA4B10LP
Microcontrollers on boards using the D3V3XA4B10LP
What boards using the D3V3XA4B10LP are built for
D3V3XA4B10LP: common questions
Where can I find a D3V3XA4B10LP reference design?
Each of the 21 boards on this page is a real design using the D3V3XA4B10LP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the D3V3XA4B10LP?
The TLV75801PDRV, ESP32-S3-MINI-1, ESP32-S3-MINI-1-N8, ENS210 and LattePanda_Mu appear in the most repositories here.
Which microcontrollers do boards using the D3V3XA4B10LP use?
Most are built on ESP32 (12), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the D3V3XA4B10LP?
The median is 55 × 46.5 mm, and 19% are two-layer designs.
What is the most popular open source board using the D3V3XA4B10LP?
By GitHub stars, Day 2 - Four Port USB-C by i2cjak, with 95 stars.
Can I simulate one of these boards using the D3V3XA4B10LP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.