Simplecodec3
About the Simplecodec3 PCB
Simplecodec3 is an open source PCB design by cyberomusubi, published on GitHub. It is a 2-layer board measuring 39.9 × 54.6 mm, with 43 components from 18 distinct parts.
Other key parts include the ATECC608A-SSHDA-B, PCM1808PWR and PCM5102PW. By type, the board carries 20 capacitors, 15 resistors, 3 ICs, 3 connectors, 1 crystal and 1 switch.
It belongs with the audio designs in this gallery.
From the project
Audio input/output board for Raspberry Pi, Jetson Nano (PCM5102A+PCM1808)
This project related to my article. Creating an audio input/output board for Raspberry Pi, Jetson Nano (PCM5102A+PCM1808)
In Japanese, Raspberry Pi, Jetson Nano向けオーディオ入出力ボードの作成(PCM5102A+PCM1808編)
This project has tested: Raspberry pi 3b Raspberry pi 4 Jetson Nano A02 Jetson Nano B01
you need to check the driver install instruction for:
Main components on the Simplecodec3
Simplecodec3 bill of materials (BOM)
43 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATECC608A-SSHDA-B | SOIC127P600X175-8N | IC1 |
| 1 | PCM1808PWR | PCM1808PWR | IC2 |
| 1 | PCM5102PW | SOP65P640X120-20N | IC3 |
| 1 | SG-8002DC | Oscillator_SeikoEpson_SG-8002DC | X1 |
| 1 | Jetson Nano J41 Header | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 2 | MJ-8435 | MJ-8435 | J2, J3 |
| 1 | SW_SPDT | PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 6 | 10u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C12, C13, C14, C16 |
| 2 | 4.7u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4 |
| 7 | 0.1u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C6, C8, C9, C10, C15, C19 |
| 2 | 2.2u | C_0402_1005Metric | C7, C11 |
| 2 | 2200p | C_Rect_L7.0mm_W3.5mm_P5.00mm | C17, C18 |
| 1 | 47u | CP_Radial_D6.3mm_P2.50mm | C20 |
| 2 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | 12k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R5 |
| 2 | 1.2k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R6 |
| 7 | 51 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8, R9, R10, R11, R12, R13 |
| 2 | 470 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14, R15 |
Simplecodec3 design files
The KiCad project lives in the cyberomusubi/simplecodec3 repository on GitHub; these links point at the commit this page was built from.
- Layoutsimplecodec3.kicad_pcb
Simplecodec3: common questions
How big is the Simplecodec3 PCB?
The Simplecodec3 measures 39.9 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simplecodec3?
43 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simplecodec3 design files?
From the cyberomusubi/simplecodec3 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Simplecodec3 design in my own project?
The repository has no license, so all rights stay with cyberomusubi. Use it as a reference, and ask the author before reusing the design.
More boards in simplecodec3
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687