HardLabs

Ardui89 UNO 5X

Cyrillinux·Ardui89·Boards/Ardui89_Uno_Cinque_X_Board/R1/Ardui89_Uno_Cinque_X.kicad_pcb

Ardui89 UNO 5X PCB layout, top view — open source AVR/Arduino board by Cyrillinux

About the Ardui89 UNO 5X PCB

Ardui89 UNO 5X is an open source AVR/Arduino PCB design by Cyrillinux, published on GitHub. It is a 2-layer board measuring 68.8 × 53.5 mm, with 40 components from 29 distinct parts.

Its main chip is the 292304-1, from the AVR/Arduino family. Other key parts include the LD1117S50TR, LP2985-33DBVR, 89C5X and CH340C. By type, the board carries 10 capacitors, 8 connectors, 8 resistors, 6 diodes, 4 ICs and 2 transistors.

From the project

Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Adds 8051 architecture family to the Arduino IDE : STC89C52RC, STC89C516RD+, STC15W408AS-DIP16

Allows you to COMPILE a .ino file of the 8051 C family program and UPLOAD it into the STC89C5x, STC15..., etc. family.

3/ In Arduino->Preferences->Additional Board Manager URLS add for Arduino All Versions https://master.dl.sourceforge.net/project/stc89/packages/packageardui89index.json?viasf=1

Main components on the Ardui89 UNO 5X

LD1117S50TRLP2985-33DBVR89C5XCH340C

Ardui89 UNO 5X bill of materials (BOM)

40 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LD1117S50TR
U1
1
LP2985-33DBVR
U2
1
89C5X
89C5x
U101
1
CH340C
U201
1
SI2301
Q101
1
MMBTA2907
BCX51
Q102
1
>=11.0592MHz
X101
1
BARRELJACK_HORIZONTAL_5.5MMX2.1MM
BarrelJack_Horizontal_5.5mmx2.1mm
J1
1
PINSOCKET_1X19_P2.54MM_VERTICAL
PinSocket_1x19_P2.54mm_Vertical
J101
1
PINSOCKET_1X16_P2.54MM_VERTICAL
PinSocket_1x16_P2.54mm_Vertical
J102
2
PINSOCKET_1X02_P2.54MM_VERTICAL
PinSocket_1x02_P2.54mm_Vertical
J103, J105
1
PINSOCKET_1X05_P2.54MM_VERTICAL
PinSocket_1x05_P2.54mm_Vertical
J104
1
PINHEADER_1X03_P2.54MM_VERTICAL
PinHeader_1x03_P2.54mm_Vertical
J106
1
292304-1
USB_B_Lumberg_2411_02_Horizontal
J200
1
SW_PUSH_6MMX6MMX5MM
SW_Push_6mmx6mmx5mm
SW101
4
1N5819W
D1, D2, D101, D200
1
LG R971-KN-1
BUILTIN_LED/Blue
D130
1
LG R971-KN-1
ON+Rx LED/Orange
D201
3
10µ
C1, C3, C101
4
C0805C104K1RACAUTO
100n
C2, C102, C104, C201
Show 9 more
QtyPartRefs
1
C2012X7R1C225K125AB
100n
C4
1
C0805C104K1RACAUTO
22p
C103
1
22P
22p
C105
1
RC0805FR-07510RL
20k
R101
2
CRCW080510K0JNEA
1k
R102, R104
1
RC0805FR-07510RL
4k7
R103
2
CRCW08051K00JNEA
330
R105, R106
1
RC0805FR-07510RL
1k
R130
1
RC0805FR-07510RL
2k2
R201

Ardui89 UNO 5X design files

The KiCad project lives in the Cyrillinux/Ardui89 repository on GitHub; these links point at the commit this page was built from.

Ardui89 UNO 5X: common questions

What microcontroller does the Ardui89 UNO 5X use?

The Ardui89 UNO 5X is built around the 292304-1, from the AVR/Arduino family.

How big is the Ardui89 UNO 5X PCB?

The Ardui89 UNO 5X measures 68.8 × 53.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ardui89 UNO 5X?

40 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ardui89 UNO 5X design files?

From the Cyrillinux/Ardui89 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ardui89 UNO 5X design in my own project?

The repository has no license, so all rights stay with Cyrillinux. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ardui89 UNO 5X without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Ardui89

Similar boards