HardLabs

Meshgw hat routed

d3athstr·mesh-internet-gateway·hardware/meshgw-hat/meshgw-hat-routed.kicad_pcb

Meshgw hat routed layout, top view — open source board by d3athstr

About the Meshgw hat routed

Meshgw hat routed is an open source PCB design by d3athstr, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 5 components from 4 distinct parts.

Other key parts include the E22-900M30S. By type, the board carries 3 capacitors, 1 IC and 1 connector.

It belongs with the rf & radio, iot & wireless and dev boards & breakouts designs in this gallery.

From the project

Wired Pi + 1W SX1262 LoRa gateway (meshtasticd) bridging the Empire12 / Techtaria mesh to the internet. PRIVATE: contains home coordinates.

Wired-Ethernet Raspberry Pi + 1 W SX1262 LoRa gateway running meshtasticd. Bridges the Empire12 / Techtaria LoRa mesh to the internet over MQTT, and publishes E12-owned nodes only to the public Meshtastic map directories.

PartsBin project [18]. Status: DEPLOYED AND LIVE 2026-09-09. The HAT is populated, the Pi is wired and provisioned, and the node is on the mesh with the MQTT bridge connected.

Main components on the Meshgw hat routed

E22-900M30S

Meshgw hat routed bill of materials (BOM)

5 components, 4 distinct parts.

QtyPartRefs
1
E22-900M30S
U1
1
RPi_GPIO40
J1
1
CP_Radial_D8.0mm_P3.50mm
C1
2
C_Disc_D5.0mm_W2.5mm_P5.00mm
C2, C3

Meshgw hat routed design files

The KiCad project lives in the d3athstr/mesh-internet-gateway repository on GitHub; these links point at the commit this page was built from.

Meshgw hat routed: common questions

How big is the Meshgw hat routed?

The Meshgw hat routed measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Meshgw hat routed?

5 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Meshgw hat routed design files?

From the d3athstr/mesh-internet-gateway repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Meshgw hat routed design in my own project?

The repository has no license, so all rights stay with d3athstr. Use it as a reference, and ask the author before reusing the design.

More boards in mesh-internet-gateway

Similar boards