Midi-Keyboard
d3wzs·Midi-Keyboard
About the Midi-Keyboard PCB
Midi-Keyboard is an open source ESP32 PCB design by d3wzs, published on GitHub. It is a 2-layer board measuring 112.3 × 84.2 mm, with 23 components from 6 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 15 diodes, 4 switches, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
Midi Keyboard is a variation of Half Lifes Midi Keyboard (Week 3) Project. I've edited to have a better layout in my opinion. Ive added my own star design from my previous week 1 project.
Midi Keyboard is a variation of Half Lifes Midi Keyboard (Week 3) Project. I've edited to have a better layout in my opinion. Ive added my own star design from my previous week 1 project.
The board features 3 low profile buttons, a 2 pentiometers, a rotary encoder and a Waveshare ESP32-S3-Zero as the main controller. The board has Capacitive keys aswell.
-Custom PCB -Capacitive Keys -Sliders -Star Design -Buttons -Rotary Encoders -Led lighting
Main components on the Midi-Keyboard
Midi-Keyboard bill of materials (BOM)
23 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Touchy Buttons | capacitive keys | J1 |
| 2 | R_Potentiometer_MountingPin | Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 15 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6, D7, D8 +7 |
Midi-Keyboard design files
The KiCad project lives in the d3wzs/Midi-Keyboard repository on GitHub; these links point at the commit this page was built from.
- LayoutMIDI.kicad_pcb
- SchematicMIDI.kicad_sch
- BOMBOM.csv
Midi-Keyboard: common questions
What microcontroller does the Midi-Keyboard use?
The Midi-Keyboard is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Midi-Keyboard PCB?
The Midi-Keyboard measures 112.3 × 84.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi-Keyboard?
23 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi-Keyboard design files?
From the d3wzs/Midi-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Midi-Keyboard design in my own project?
The repository has no license, so all rights stay with d3wzs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k