Li-Ion-Charger
damnitzhemanth-oss·Li-Ion-Charger·PCB/Li-Ion-Charger.kicad_pcb
About the Li-Ion-Charger PCB
Li-Ion-Charger is an open source PCB design by damnitzhemanth-oss, published on GitHub. It is a 2-layer board measuring 33.8 × 17.2 mm, with 21 components from 15 distinct parts.
Other key parts include the IP2312-4V35 and DW01A. By type, the board carries 8 resistors, 4 capacitors, 2 ICs, 2 diodes, 2 inductors and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Custom lithium ion charger that is small and does not blow up
The Problem : In Indian market especially, TP4050 is available to charge lithium ion battery, but it sucks as it slowly damages the cell. But there are bigger alternatives which safely charge it. Buy those are bulky. This Custom Li Ion charger solves that.
1. 2A+ charging so you can charge with normal chargers. 2. Type C only. 3. Status LEDs (Red 🍒 - Charging, Green 🍏 - Charged) 4. Over Current protection with Mosfets

Main components on the Li-Ion-Charger
Li-Ion-Charger bill of materials (BOM)
21 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP2312-4V35 INJOINIC(英集芯) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U1 |
| 1 | DW01A | SOT-23-6 | U2 |
| 1 | FS8205A FS8205A_C2830320 TECH PUBLIC(台舟) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | Q1 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | 10k Thermistor_NTC | R_0603_1608Metric | TH1 |
| 1 | LED_RED | LED_0603_1608Metric | D1 |
| 1 | LED_GREEN | LED_0603_1608Metric | D2 |
| 1 | FerriteBead | L_0603_1608Metric | FB1 |
| 1 | 2.2 uH Power Inductor | L_0805_2012Metric | L1 |
| 1 | 22uF Ceramic | C_0603_1608Metric | C1 |
| 2 | 100nF Ceramic | C_0603_1608Metric | C2, C3 |
| 1 | 22µF | C_0603_1608Metric | C4 |
| 5 | 1k | R_0603_1608Metric | R1, R2, R4, R7, R8 |
| 1 | 68K 68k | R_0603_1608Metric | R3 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R5, R6 |
Li-Ion-Charger design files
The KiCad project lives in the damnitzhemanth-oss/Li-Ion-Charger repository on GitHub; these links point at the commit this page was built from.
Li-Ion-Charger: common questions
How big is the Li-Ion-Charger PCB?
The Li-Ion-Charger measures 33.8 × 17.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Li-Ion-Charger?
21 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Li-Ion-Charger design files?
From the damnitzhemanth-oss/Li-Ion-Charger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Li-Ion-Charger design in my own project?
The repository has no license, so all rights stay with damnitzhemanth-oss. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k