Survival-PC-3000
About the Survival-PC-3000 PCB
Survival-PC-3000 is an open source PCB design by Danger2007, published on GitHub. It is a board, with 18 components from 16 distinct parts.
Other key parts include the RPI ZERO 2W, LiPo Battery 3.7V 2200mAh, LiPo Battery 3.7V 2200 mAh, diy geiger counter radiation detector and RTC Module with DS3231 Chip. By type, the board carries 8 ICs and 4 switches.
It belongs with the power & battery and science & space designs in this gallery.
From the project
A post-apocalyptic forearm PC inspired by the Pip-Boy from Fallout New Vegas
Main components on the Survival-PC-3000
Survival-PC-3000 bill of materials (BOM)
18 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RPI ZERO 2W Raspberry Pi Foundation | U1 | |
| 1 | LiPo Battery 3.7V 2200mAh | U2 | |
| 1 | LiPo Battery 3.7V 2200 mAh | U3 | |
| 1 | diy geiger counter radiation detector | U4 | |
| 1 | RTC Module with DS3231 Chip | U5 | |
| 1 | usb port type C (2 pin) | U6 | |
| 1 | TFTLCD_3.5INCH (SCREEN) | U7 | |
| 1 | Adafruit PowerBoost-1000C | U9 | |
| 1 | ROTARY SWITCH (Wheel) | 1 | |
| 1 | TEA5767 FM Radio | FM1 | |
| 1 | USB Port (4-pins) Ckmtw | H1 | |
| 1 | Rotary ENCODER (1P5T) (Knob) | ROT1 | |
| 3 | Switch_With_LED | S1, S2, S3 | |
| 1 | SPEAKER mini nuovo | SP1 | |
| 1 | POWER SWITCH Würth Elektronik | SW1 | |
| 1 | MICRO USB (5pins) | USB1 |
Survival-PC-3000 design files
The KiCad project lives in the Danger2007/Survival-PC-3000 repository on GitHub; these links point at the commit this page was built from.
Survival-PC-3000: common questions
How many components are on the Survival-PC-3000?
18 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Survival-PC-3000 design files?
From the Danger2007/Survival-PC-3000 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Survival-PC-3000 design in my own project?
The repository has no license, so all rights stay with Danger2007. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k