Door alarm system

dani9875·door_alarm_system·door_alarm_hw/door_open_alarm.kicad_pcb

Door alarm system PCB layout, top view — open source ESP32 board by dani9875

About the Door alarm system PCB

Door alarm system is an open source ESP32 PCB design by dani9875, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 57.7 × 48.1 mm, with 43 components from 23 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the AP2114HA-3.3TRG1. By type, the board carries 17 resistors, 8 capacitors, 6 diodes, 3 transistors, 3 switches and 2 ICs.

It belongs with the iot & wireless designs in this gallery.

From the project

When a change is detected, the system transmits the event data through the local network to cloud services. The cloud then relays the information to a mobile application, alerting the property owner via a notification. This ensures the owner is promptly informed whenever someone

When a change is detected, the system transmits the event data through the local network to cloud services. The cloud then relays the information to a mobile application, alerting the property owner via a notification. This ensures the owner is promptly informed whenever someone enters or leaves the property.

In case you are interested in making your own instance, please find the HW manufacturing files under the release tab.

Door alarm system, from the project README
From the project README

Main components on the Door alarm system

Door alarm system bill of materials (BOM)

43 components, 23 distinct parts.

QtyPartRefs
1
AP2114HA-3.3TRG1
Diodes Incorporated
U1
1
ESP32-S3-MINI-1
Espressif Systems
U2
1
BSS138PW,115
Nexperia
Q1
2
CJ2301 S1
Jiangsu Changjing Electronics Technology Co., Ltd.
Q2, Q3
1
TYPE-C 16PIN 2MD(073)
SHOU HAN
J1
1
0466.200NRHF
Littelfuse
F1
1
PZ254V-11-06P
XFCN
H1
1
SS-12D10L5
XKB Connection
S1
2
TS-1088-AR02016
XUNPU
S2, S3
3
STPS140Z
STMicroelectronics
D1, D2, D4
1
IP4283CZ10-TBR,115
Nexperia
D3
2
LTST-C190KRKT
Lite-On
D5, D6
1
DLW21SN900SQ2L
Murata Electronics
L1
3
CL21A106KOQNNNE
Samsung
C1, C3, C7
2
CC0805KRX7R9BB104
YAGEO
C2, C8
3
C0805C105M4VACTU
KEMET
C4, C5, C6
8
0805W8F1002T5E
UNI-ROYAL(Uniroyal Elec)
R1, R2, R5, R7, R9, R10, R12, R15
3
0805W8F5101T5E
UNI-ROYAL(Uniroyal Elec)
R3, R4, R14
1
0805W8F1004T5E
UNI-ROYAL(Uniroyal Elec)
R6
1
0805W8F1001T5E
UNI-ROYAL(Uniroyal Elec)
R8
Show 3 more
QtyPartRefs
1
0805W8F1003T5E
UNI-ROYAL(Uniroyal Elec)
R11
1
0805W8J0203T5E
UNI-ROYAL(Uniroyal Elec)
R13
2
0805W8F4700T5E
UNI-ROYAL(Uniroyal Elec)
R16, R17

Door alarm system design files

The KiCad project lives in the dani9875/door_alarm_system repository on GitHub; these links point at the commit this page was built from.

Door alarm system: common questions

What microcontroller does the Door alarm system use?

The Door alarm system is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the Door alarm system PCB?

The Door alarm system measures 57.7 × 48.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Door alarm system?

43 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Door alarm system design files?

From the dani9875/door_alarm_system repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Door alarm system design in my own project?

Yes, under the terms of its Apache-2.0 license, which dani9875 chose for the repository.

Can I test firmware for the Door alarm system without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards