68 open source boards using the ESP32-S3-MINI-1
Real designs built with the ESP32-S3-MINI-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ILDAWaveX16
stanleyondrus
52.8 × 55 mm94 parts2LNo license43ESP32
ESPHome-DeskPI-Fan-Controller
mikaelholber
39 × 39 mm39 parts4LNo license37ESP32
Wakeboard
alexspurling
33.6 × 56.4 mm32 parts2LNo license21ESP32
Elegoo centaury carbon-Filament-Movement-Sensor
Sohcahtoaii
58 × 32 mm45 parts2LGPL-3.08ESP32
Backbone
andreapiccini
31.4 × 68.9 mm60 parts4LCustom license6ESP32
ProtoBoard
ciborg971
56 × 48 mm84 parts4LMIT5ESP32
WiFiMaster
Phunkafizer
67.4 × 54.3 mm63 parts2LMIT5ESP32
PCB-3-Phase-Energy-Monitor
MbFredys
62.2 × 140 mm197 parts4LCERN-OHL-W-2.04ESP32
Starman
adamm
182 × 150 mm241 parts4LCustom license3ESP32
Hardware-TUDCTF2025
Emway79
49.5 × 57.7 mm56 parts2LCC-BY-SA-4.03ESP32
Posture-Tracker-Using-ESP32
kiranj26
47.9 × 28.5 mm52 parts2LMIT3ESP32
ESP32-Faikout-CostOptimize
Phiumi
70 × 58 mm23 parts4LGPL-3.03ESP32
EUB-04 Emiuet
emnyeca
297 × 102.4 mm251 parts2LNo license2ESP32
Rc car
alaotach
129 × 79.8 mm85 parts4LNo license2ESP32
ESP-32-Dev-Board
Fred98246
25.4 × 62.7 mm27 parts4LMIT2- schematic only · 1 partsESP32
Kicad mcp
lucatib
1 partsMIT2 ESP32
Kronos-Hardware
AddeyX
65.6 × 91.8 mm144 parts4LNo license1ESP32
Balancing cam
NEOgHacking
50 × 50 mm116 parts4LNo license1ESP32
Lumi tubule
NemoAndrea
83.1 × 83.1 mm74 parts2LCERN-OHL-W-2.01ESP32
Lora pager
alx-alexpark
85 × 66 mm69 parts2LNo license1ESP32
Dude dirty usb disconnect
ldab
40 × 50 mm36 parts2LWTFPL1ESP32
Pump controller hardware
UWARG
99.5 × 69 mm240 parts4LNo license0ESP32
Car iot services
karuru6225
80 × 78 mm131 parts2LNo license0ESP32
RoboMausV2
Arne-Berner
90 × 95 mm100 parts4LNo license0ESP32
Digital circuits
tyduszkaszok
70.4 × 48.2 mm73 parts2LNo license0ESP32
Esp32stepper
szf2020
40 × 40 mm67 parts4LCERN-OHL-W-2.00ESP32
Mp3player
ILikeMice
55.5 × 54 mm65 parts2LNo license0ESP32
Raster bot
rhammell
65 × 28 mm63 parts4LNo license0ESP32
AquaBoard
Lekylouch
98.7 × 55.6 mm62 parts2LNo license0ESP32
Usbc esp32-pump controller
CarloMara
65 × 47.4 mm60 parts2LNo license0ESP32
Controller
someonelse20
125 × 95 mm59 parts2LNo license0ESP32
Custom Esp32 Devboard
shreyD2408
84 × 72 mm55 parts4LNo license0ESP32
FPGABoard
TTF-fog
36.7 × 56.3 mm52 parts4LNo license0ESP32
Controllab
dev-campusfab
61.8 × 70.9 mm50 parts2LNo license0ESP32
ESP32 2
Rugved2004
26.8 × 62 mm49 parts2LNo license0ESP32
Steer32
jpt1729
29 × 62.2 mm49 parts2LNo license0
How designs wire the ESP32-S3-MINI-1
Read from the KiCad layouts of 63 open source designs, one per repository: what each pin of the ESP32-S3-MINI-1 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 49 of 62 designs, most often 10 kΩ (then 5.1 kΩ).
- The EN pin has a capacitor to GND on 47 of 62 designs, most often 1 µF (then 100 nF).
- The 3V3 pin is tied to 3.3V on 55 of 63 designs (a signal on 6).
- The IO46 pin is left unconnected on 43 of 62 designs (a signal on 18).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 42, 43, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65 | Connected to: GND 98% | — |
| 3V3pin 3 | Connected to: 3.3V 87% | — |
| IO0pin 4 | Connected to: Signal 86% |
|
| IO26pin 26 | Connected to: Not connected 68% · a signal 31% | — |
| IO47pin 27 | Connected to: Not connected 65% · a signal 35% | — |
| IO40pin 36 | Connected to: Not connected 61% · a signal 39% | — |
| IO41pin 37 | Connected to: Not connected 63% · a signal 37% | — |
| IO42pin 38 | Connected to: Not connected 65% · a signal 35% | — |
| IO45pin 41 | Connected to: Not connected 66% · a signal 34% | — |
| IO46pin 44 | Connected to: Not connected 69% · a signal 29% | — |
| ENpin 45 | Connected to: Signal 95% |
|
31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Powertrain by byrantech, ILDAWaveX16 by stanleyondrus, ESPHome-DeskPI-Fan-Controller by mikaelholber and Wakeboard by alexspurling.
The ESP32-S3-MINI-1 in open source designs
The gallery holds 68 open source boards using the ESP32-S3-MINI-1 from 64 GitHub repositories; a typical one measures about 58 × 56.3 mm and carries around 49 components.
63% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is Powertrain by byrantech.
Parts used alongside the ESP32-S3-MINI-1
Microcontrollers on boards using the ESP32-S3-MINI-1
What boards using the ESP32-S3-MINI-1 are built for
ESP32-S3-MINI-1: common questions
Where can I find a ESP32-S3-MINI-1 reference design?
Each of the 68 boards on this page is a real design using the ESP32-S3-MINI-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-S3-MINI-1 EN pin?
The EN pin has a pull-up to 3.3V on 49 of 62 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 63 open source designs using the ESP32-S3-MINI-1.
How is the ESP32-S3-MINI-1 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 55 of 63 designs (a signal on 6). Counted from the KiCad layouts of 63 open source designs using the ESP32-S3-MINI-1.
How is the ESP32-S3-MINI-1 IO46 pin connected?
The IO46 pin is left unconnected on 43 of 62 designs (a signal on 18). Counted from the KiCad layouts of 63 open source designs using the ESP32-S3-MINI-1.
What parts are used alongside the ESP32-S3-MINI-1?
The AMS1117-3.3, USBLC6-2SC6, TP4056-42-ESOP8, USBLC6-2P6 and MAX98357A appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-MINI-1 use?
Most are built on ESP32 (68).
How big is a typical board using the ESP32-S3-MINI-1?
The median is 58 × 56.3 mm, and 63% are two-layer designs.
What is the most popular open source board using the ESP32-S3-MINI-1?
By GitHub stars, Powertrain by byrantech, with 4,264 stars.
Can I simulate one of these boards using the ESP32-S3-MINI-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.