MiniEasy
Daniel-Alencar·MiniEasy
About the MiniEasy PCB
MiniEasy is an open source STM32 PCB design by Daniel-Alencar, published on GitHub. It is a 2-layer board measuring 66 × 26 mm, with 53 components from 25 distinct parts.
Its main chip is the STM32F042K6T6, from the STM32 family. Other key parts include the MCP1703A-3302E/MB, MS5607-02BA03, W25Q16JVSSIQ and USBLC6-2SC6. By type, the board carries 18 resistors, 17 capacitors, 5 ICs, 5 connectors, 4 diodes and 3 transistors.
From the project
Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com teste de continuidade, download por USB. Sem GPS, sem acelerômetr
Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com teste de continuidade, download por USB. Sem GPS, sem acelerômetro, sem telemetria.
- SINAIS.md — cada sinal: função, conexões, tensões, notas de firmware. - ALIMENTACAO.md — por que o bloco de alimentação é assim: o "OU" de diodos, a escolha do regulador, o reservatório de disparo e o desacoplamento.
Main components on the MiniEasy
MiniEasy bill of materials (BOM)
53 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1703A-3302E/MB | SOT-89-3 | U1 |
| 1 | STM32F042K6T6 | LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | MS5607-02BA03 | LGA-8_3x5mm_P1.25mm | U3 |
| 1 | W25Q16JVSSIQ | SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | BSS138 | SOT-23 | Q3 |
| 1 | BAT 4-16 V | TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal | J1 |
| 1 | SWD | PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | USB micro-B | USB_Micro-B_Molex_47346-0001 | J3 |
| 1 | PIRO APOGEU | TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal | J4 |
| 1 | PIRO PRINCIPAL | TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal | J5 |
| 1 | CMT-8504-100-SMT | MagneticBuzzer_CUI_CMT-8504-100-SMT | LS1 |
| 3 | B5819W | D_SOD-123 | D1, D2, D3 |
| 1 | LED verde | LED_0603_1608Metric | D4 |
| 1 | 100u/25V | CP_Elec_6.3x7.7 | C1 |
| 1 | 10u/25V | C_0805_2012Metric | C2 |
| 1 | 10u | C_0805_2012Metric | C3 |
| 9 | 100n | C_0603_1608Metric | C4, C5, C6, C7, C9, C11, C12, C13 +1 |
| 3 | 1u | C_0603_1608Metric | C8, C10, C14 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10n | C_0603_1608Metric | C16, C17 |
| 8 | 100k | R_0603_1608Metric | R1, R6, R7, R9, R10, R13, R14, R17 |
| 6 | 10k | R_0603_1608Metric | R2, R3, R4, R5, R11, R15 |
| 3 | 100R | R_0603_1608Metric | R8, R12, R16 |
| 1 | 1k | R_0603_1608Metric | R18 |
MiniEasy design files
The KiCad project lives in the Daniel-Alencar/MiniEasy repository on GitHub; these links point at the commit this page was built from.
- Layoutaltimetro.kicad_pcb
- Schematicaltimetro.kicad_sch
- BOMbom.csv
MiniEasy: common questions
What microcontroller does the MiniEasy use?
The MiniEasy is built around the STM32F042K6T6, from the STM32 family.
How big is the MiniEasy PCB?
The MiniEasy measures 66 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MiniEasy?
53 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MiniEasy design files?
From the Daniel-Alencar/MiniEasy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MiniEasy design in my own project?
The repository has no license, so all rights stay with Daniel-Alencar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MiniEasy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k