5 open source boards using the MS5607-02BA03
Real designs built with the MS5607-02BA03, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Alakol
richardeoin
78 × 56 mm118 parts4LNo license1ESP32
Self landing rocket
npsggehlot-cmyk
70 × 70 mm94 parts4LNo license0STM32
MiniEasy
Daniel-Alencar
66 × 26 mm53 parts2LNo license0POWER NODE V2
rLoopTeam
198.8 × 164.8 mm132 parts2LNo license5PIC
PropulsionBoard
waterloo-rocketry
56.9 × 61.3 mm99 parts2LGPL-3.015
How designs wire the MS5607-02BA03
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MS5607-02BA03 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- The SDA pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCLK pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ (then 10 kΩ).
- The PS pin is tied to 3.3V on 3 of 5 designs (GND on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 80% · a signal 20% |
|
| PSpin 2 | Connected to: 3.3V 60% · GND 40% | — |
| GNDpin 3 | Connected to: GND 80% · not connected 20% | — |
| CSBpin 4, 5 | Connected to: The microcontroller 40% · GND 20% · 3.3V 30% |
|
| SDOpin 6 | Connected to: Not connected 60% · a signal 40% | — |
| SDApin 7 | Connected to: The microcontroller 60%, a connector 40% |
|
| SCLKpin 8 | Connected to: The microcontroller 60%, a connector 40% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PropulsionBoard by waterloo-rocketry, POWER NODE V2 by rLoopTeam, Alakol by richardeoin and MiniEasy by Daniel-Alencar.
The MS5607-02BA03 in open source designs
The gallery holds 5 open source boards using the MS5607-02BA03 from 5 GitHub repositories; a typical one measures about 70 × 61.3 mm and carries around 99 components.
60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is PropulsionBoard by waterloo-rocketry.
What boards using the MS5607-02BA03 are built for
MS5607-02BA03: common questions
Where can I find a MS5607-02BA03 reference design?
Each of the 5 boards on this page is a real design using the MS5607-02BA03. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MS5607-02BA03 VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MS5607-02BA03.
What pull-up resistor is used on the MS5607-02BA03 SDA pin?
The SDA pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the MS5607-02BA03.
What pull-up resistor is used on the MS5607-02BA03 SCLK pin?
The SCLK pin has a pull-up to 3.3V on 3 of 5 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the MS5607-02BA03.
Which microcontrollers do boards using the MS5607-02BA03 use?
Most are built on STM32 (2), ESP32 (1) and PIC (1).
How big is a typical board using the MS5607-02BA03?
The median is 70 × 61.3 mm, and 60% are two-layer designs.
What is the most popular open source board using the MS5607-02BA03?
By GitHub stars, PropulsionBoard by waterloo-rocketry, with 15 stars.
Can I simulate one of these boards using the MS5607-02BA03 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.