78 open source boards using the W25Q16JVSSIQ

Real designs built with the W25Q16JVSSIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

78 boardsClear filters|Most starred

How designs wire the W25Q16JVSSIQ

Read from the KiCad layouts of 44 open source designs, one per repository: what each pin of the W25Q16JVSSIQ connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 29 of 44 designs, most often 100 nF (then 1 µF).
  • The CS pin has a pull-up to 3.3V on 22 of 44 designs, most often 10 kΩ (then 5.1 kΩ).
  • The CS pin has a series resistor on 20 of 44 designs, most often 1 kΩ (then 3 mΩ).
CSpin 1Connected to: The microcontroller 80%
  • Pull-up to 3.3V on 50% · 10 kΩ (18), 5.1 kΩ (2)
  • Series resistor on 45% · 1 kΩ (17), 3 mΩ (2), 2.2 kΩ (1)
GNDpin 4Connected to: GND 98%
VCCpin 8Connected to: 3.3V 89%
  • Decoupling capacitor on 66% · 100 nF (40), 1 µF (3), 22 µF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Driver Module by Twisted-Fields, Ecp5-stamp by multigcs, Rpi pico debugger shoe by ShawnHymel and Frank next by rh1tech.

The W25Q16JVSSIQ in open source designs

The gallery holds 78 open source boards using the W25Q16JVSSIQ from 46 GitHub repositories; a typical one measures about 65.5 × 50.5 mm and carries around 70 components.

54% use four copper layers or more, and 47% carry an open source license.

The most starred is Dual CPU Base Board by Twisted-Fields.

Microcontrollers on boards using the W25Q16JVSSIQ

W25Q16JVSSIQ: common questions

Where can I find a W25Q16JVSSIQ reference design?

Each of the 78 boards on this page is a real design using the W25Q16JVSSIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q16JVSSIQ VCC pin?

The VCC pin has a decoupling capacitor on 29 of 44 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 44 open source designs using the W25Q16JVSSIQ.

What pull-up resistor is used on the W25Q16JVSSIQ CS pin?

The CS pin has a pull-up to 3.3V on 22 of 44 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 44 open source designs using the W25Q16JVSSIQ.

What parts are used alongside the W25Q16JVSSIQ?

The RP2040, USBLC6-2SC6, AP2112K-3.3TRG1, AMS1117-3.3 and SC0914(13) appear in the most repositories here.

Which microcontrollers do boards using the W25Q16JVSSIQ use?

Most are built on RP2040/RP2350 (60), STM32 (9), ESP32 (5) and FPGA (2).

How big is a typical board using the W25Q16JVSSIQ?

The median is 65.5 × 50.5 mm, and 46% are two-layer designs.

What is the most popular open source board using the W25Q16JVSSIQ?

By GitHub stars, Dual CPU Base Board by Twisted-Fields, with 419 stars.

Can I simulate one of these boards using the W25Q16JVSSIQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part