HardLabs

MAVLink-Lights-Hardware

DanielAdelodun·MAVLink-Lights-Hardware

MAVLink-Lights-Hardware PCB layout, top view — open source RP2040/RP2350 board by DanielAdelodun

About the MAVLink-Lights-Hardware PCB

MAVLink-Lights-Hardware is an open source RP2040/RP2350 PCB design by DanielAdelodun, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 79 components from 33 distinct parts.

Its main chip is the C42411118, from the RP2040/RP2350 family. Other key parts include the C26537, C97521 and C5219261. By type, the board carries 23 resistors, 21 capacitors, 20 connectors, 4 ICs, 4 switches and 4 diodes.

From the project

KiCAD files for MAVLink LED Strip Controller Hardware. Firmware can be found here: https://github.com/DanielAdelodun/MAVLink_Lights

Main components on the MAVLink-Lights-Hardware

C42411118C26537C97521C5219261

MAVLink-Lights-Hardware bill of materials (BOM)

79 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C42411118
RP2350_60QFN
U1
1
C26537
NCP1117-3.3_SOT223
U2
1
C97521
W25Q128JVS
U3
1
C5219261
LMR51430
U4
1
C20625731
ABM8-272-T3
Y1
7
1.7mm Solder Pads
J1, J9, J14, J15, J20, J21, J22
9
C160404
SM04B-SRSS-TB
J2, J3, J4, J5, J6, J7, J8, J10 +1
2
2.3mm Solder Pads
J12, J13
1
1.7mm Solder Pads
J17
1
C165948
USB_C_Receptacle_USB2.0_14P
J19
4
C92589
SW_Push
SW1, SW2, SW3, SW4
1
C179432
PMEG6010ELR
D1
1
C2286
KT-0603R
D2
1
C2290
KT-0603W
D3
1
C2289
KT-0603YG
D4
1
C42411119
3.3u
L1
1
C3002620
6.8u
L2
1
C377773
2.2u
C1
11
C1525
100n
C2, C8, C11, C12, C13, C14, C15, C16 +3
2
C161530
15p
C3, C4
Show 13 more
QtyPartRefs
3
C1713
10u
C5, C19, C21
4
C23733
4.7u
C6, C7, C9, C10
2
C22369461
22
R1, R9
3
C11702
1k
R2, R4, R6
2
C25908
5k6
R3, R22
1
C25105
33
R5
2
C174257
27
R7, R8
2
C25905
5.1k
R10, R19
5
C25744
10k
R11, R17, R18, R21, R23
1
C136979
100k
R12
1
C852522
13.7k
R13
3
C25117
470
R14, R15, R16
1
C37825
62k
R20

MAVLink-Lights-Hardware design files

The KiCad project lives in the DanielAdelodun/MAVLink-Lights-Hardware repository on GitHub; these links point at the commit this page was built from.

MAVLink-Lights-Hardware: common questions

What microcontroller does the MAVLink-Lights-Hardware use?

The MAVLink-Lights-Hardware is built around the C42411118, from the RP2040/RP2350 family.

How big is the MAVLink-Lights-Hardware PCB?

The MAVLink-Lights-Hardware measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MAVLink-Lights-Hardware?

79 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MAVLink-Lights-Hardware design files?

From the DanielAdelodun/MAVLink-Lights-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MAVLink-Lights-Hardware design in my own project?

The repository has no license, so all rights stay with DanielAdelodun. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MAVLink-Lights-Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards