6 open source boards using the C26537
Real designs built with the C26537, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
SimplyKeeb-60K
geaz
291 × 153.2 mm158 parts2LGPL-3.040RP2040/RP2350
Modulus
advaitconty
295.6 × 183 mm230 parts2LNo license0RP2040/RP2350
MAVLink-Lights-Hardware
DanielAdelodun
40 × 40 mm79 parts4LNo license0RP2040/RP2350
Pikey
Thenewtechgu
15.7 × 40.1 mm46 parts4LNo license0RP2040/RP2350
MountPico
AaradhyaBarnwal
26.6 × 51 mm36 parts2LNo license0RP2040/RP2350
RP2040 Minimal Design Example
rompasaurus
52 × 51 mm30 parts2LNo license2
How designs wire the C26537
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the C26537 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 3 of 6 designs, most often 10 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 67% · a signal 33% |
|
| VOpin 2 | Connected to: 3.3V 100% |
|
| VIpin 3 | Connected to: VBUS 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SimplyKeeb-60K by geaz, RP2040 Minimal Design Example by rompasaurus, MountPico by AaradhyaBarnwal and Modulus by advaitconty.
The C26537 in open source designs
The gallery holds 6 open source boards using the C26537 from 6 GitHub repositories; a typical one measures about 46 × 51 mm and carries around 63 components.
67% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is SimplyKeeb-60K by geaz.
Microcontrollers on boards using the C26537
What boards using the C26537 are built for
C26537: common questions
Where can I find a C26537 reference design?
Each of the 6 boards on this page is a real design using the C26537. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C26537 VI pin?
The VI pin has a decoupling capacitor on 3 of 6 designs, most often 10 µF. Counted from the KiCad layouts of 6 open source designs using the C26537.
Which microcontrollers do boards using the C26537 use?
Most are built on RP2040/RP2350 (6).
How big is a typical board using the C26537?
The median is 46 × 51 mm, and 67% are two-layer designs.
What is the most popular open source board using the C26537?
By GitHub stars, SimplyKeeb-60K by geaz, with 40 stars.
Can I simulate one of these boards using the C26537 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.