HardLabs

Goobylåda - Kretskort - BACKUP

DanielMartensson·GoobyBox·Goobylåda PLC/Goobylåda - Kretskort - BACKUP.kicad_pcb

Goobylåda - Kretskort - BACKUP PCB layout, top view — open source AVR/Arduino board by DanielMartensson

About the Goobylåda - Kretskort - BACKUP PCB

Goobylåda - Kretskort - BACKUP is an open source AVR/Arduino PCB design by DanielMartensson, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 99 components from 19 distinct parts.

Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. Other key parts include the LM7812_TO220. By type, the board carries 41 resistors, 21 diodes, 18 connectors, 12 transistors, 5 capacitors and 1 IC.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

I/O Shield for Arduino UNO

This project is GoobyBox. It's an IO-shield for Arduino UNO. The purpose with this project is to provide a simple solution for controlling:

4 x Analog 0-10V inputs 3 x PWM current 0-2A 3 x Digital output current 0-2A 6 x Digital input 24V protection 12/24 voltage supply I2C connection for LCD

This project contains two projects - Surface Mounted Technology(SMT) and Through Hole Technology Mounting (THT).

Goobylåda - Kretskort - BACKUP, from the project README
From the project README

Main components on the Goobylåda - Kretskort - BACKUP

LM7812_TO220Arduino_UNO_R3

Goobylåda - Kretskort - BACKUP bill of materials (BOM)

99 components, 19 distinct parts.

QtyPartRefs
1
LM7812_TO220
U1
1
Arduino_UNO_R3
A1
6
2N2222
Q1, Q2, Q3, Q7, Q8, Q9
3
IRF9630
Q4, Q5, Q6
3
MJE2955T
Q10, Q11, Q12
1
LCD 1602 kontakt
J1
16
Anslutning
J2, J3, J4, J6, J7, J8, J9, J10 +8
1
Anslutning
J5
10
1N5400K
D1, D2, D3, D5, D6, D7, D8, D9 +2
1
600V 1A
D4
10
5.2V
D12, D13, D14, D15, D16, D17, D18, D19 +2
3
33uF
C1, C2, C3
1
0.33uF
C4
1
0.1uF
C5
6
100
R1, R2, R3, R13, R14, R15
18
100k
R4, R5, R6, R7, R8, R9, R10, R11 +10
3
1k, 1W
R16, R17, R18
8
1k
R22, R23, R24, R25, R26, R27, R28, R29
6
10k
R30, R31, R32, R33, R34, R35

Goobylåda - Kretskort - BACKUP design files

The KiCad project lives in the DanielMartensson/GoobyBox repository on GitHub; these links point at the commit this page was built from.

Goobylåda - Kretskort - BACKUP: common questions

What microcontroller does the Goobylåda - Kretskort - BACKUP use?

The Goobylåda - Kretskort - BACKUP is built around the Arduino_UNO_R3, from the AVR/Arduino family.

How big is the Goobylåda - Kretskort - BACKUP PCB?

The Goobylåda - Kretskort - BACKUP measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Goobylåda - Kretskort - BACKUP?

99 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Goobylåda - Kretskort - BACKUP design files?

From the DanielMartensson/GoobyBox repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Goobylåda - Kretskort - BACKUP design in my own project?

Yes, under the terms of its MIT license, which DanielMartensson chose for the repository.

Can I test firmware for the Goobylåda - Kretskort - BACKUP without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in GoobyBox

Similar boards