Tiny cam
danielstebbings·tiny-cam·tiny-cam/tiny-cam.kicad_pcb
About the Tiny cam PCB
Tiny cam is an open source ESP32 PCB design by danielstebbings, published on GitHub under the MPL-2.0 license. It is a 2-layer board measuring 18 × 50 mm, with 33 components from 22 distinct parts.
Its main chip is the ESP32-S3R8, from the ESP32 family. Other key parts include the TPS54331DR, ME6211C28M5 and ME6211C15M5. By type, the board carries 17 capacitors, 5 resistors, 4 ICs, 2 connectors, 1 transistor and 1 diode.
From the project
esp32-s3 tiny camera board
Main components on the Tiny cam
Tiny cam bill of materials (BOM)
33 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3R8 Texas Instruments | QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm_ThermalVias | U1 |
| 1 | TPS54331DR Texas Instruments | SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U2 |
| 1 | ME6211C28M5 | SOT-23-5 | U3 |
| 1 | ME6211C15M5 | SOT-23-5 | U4 |
| 1 | AO3401A Alpha & Omega Semicon | Q_SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4110 | J1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | FPC-05F-24PH20 | FPC-SMD_24P-P0.50_FPC-05F-24PH20 | FPC1 |
| 1 | MP23DB01HPTR | CHIP_B02MM_STM | MIC1 |
| 1 | B340 | D_SMC | D1 |
| 1 | 15uH 1.15A 190mR | L_APV_ANR4018 | L1 |
| 1 | 22uF Samsung Electro-Mechanics | C_0603 | C1 |
| 1 | 47uF Samsung Electro-Mechanics | C_0805 | C2 |
| 1 | 8.2nF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C3 |
| 1 | 6.8nF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C4 |
| 1 | 470pF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C5 |
| 6 | 100nF YAGEO | C_0603 | C6, C12, C13, C14, C15, C17 |
| 5 | 1uF Samsung Electro-Mechanics | C_0603 | C7, C8, C9, C10, C16 |
| 1 | 15pF Samsung Electro-Mechanics | C_0603 | C11 |
| 1 | 4.3kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R2, R3, R5 |
| 1 | 3.3kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R4 |
Tiny cam design files
The KiCad project lives in the danielstebbings/tiny-cam repository on GitHub; these links point at the commit this page was built from.
- Layouttiny-cam/tiny-cam.kicad_pcb
- Schematictiny-cam/tiny-cam.kicad_sch
Tiny cam: common questions
What microcontroller does the Tiny cam use?
The Tiny cam is built around the ESP32-S3R8, from the ESP32 family.
How big is the Tiny cam PCB?
The Tiny cam measures 18 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tiny cam?
33 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tiny cam design files?
From the danielstebbings/tiny-cam repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tiny cam design in my own project?
Yes, under the terms of its MPL-2.0 license, which danielstebbings chose for the repository.
Can I test firmware for the Tiny cam without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k